Filter
Top Products
31
Basic adjustment settings (Analogue/Digital)
No Signal Off
When set to “Enable”, the power will automatically shut
down if no signal inputs for 15 minutes.
Press a/b to select “No Signal Off”, and
then press ENTER.
Press c/d to select “Enable”, and then
press ENTER
3
4
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• “Disable” is factory preset value.
• When a TV programme finishes, this function may not
operate.
Press c/d to select “Power Control”.
• Power control menu displays.
Press MENU and the MENU screen displays.
No Operation Off
When set to “Enable”, the power will automatically shut
down if there is no operation for 3 hours.
Press a/b to select “No Operation Off”, and
then press ENTER.
Press c/d to select “Enable”, and then
press ENTER.
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• “Disable” is factory preset value.
Press c/d to select “Power Control”.
• Power control menu displays.
Press MENU and the MENU screen displays.
Power Control
Power control setting allows you to save energy.
2
1
3
4
2
1
LC-GD7X_E-h 06.9.29, 11:37 AM31