Filter
Top Products
28
Audio adjustment
For each AV position, you can adjust the following three
items: Treble, Bass, and Balance; to your preferred
setting.
After choosing the AV position you want to adjust, next
carry out audio adjustment.
Press c/d to select “Audio”.
Press a/b to select a specific adjustment
item.
Press c/d to adjust the item to your desired
position.
Basic adjustment settings
2
3
4
cbutton
For weaker treble
For weaker bass
Decrease audio from
the right speaker
Selected item
Treble
Bass
Balance
dbutton
For stronger treble
For stronger bass
Decrease audio from
the left speaker
Press MENU and the MENU screen displays.
1
NOTE
• For resetting all adjustment items to factory preset values,
press a/b to select “Reset”, press ENTER, press c/d
to select “Yes”, and then press ENTER.
• Audio menu items other than “AV Mode” are greyed out
when headphones are in use.
MENU
[
Audio
]
Audio Power Control
Treble
Bass
Balance
Surround
Reset
[Off]
[0]
[0]
–15
L
+15
[0] –15
+15
R
AV Mode [STANDARD]
AV mode selection
This option links to “AV Mode” in the Picture menu.
(See page 25.)
Press MENU and the MENU screen displays.
1
2
Press c/d to select “Picture”.
3
Press a/b to select “Advanced”, and then
press ENTER.
Monochrome
For viewing a video in monochrome.
Press a/b to select “Monochrome”, and
then press ENTER.
Press c/d to select “On”, and then press
ENTER.
4
5
Film mode
Automatically detects a film-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it then recreates each
still film frame for high-definition picture quality.
Press a/b to select “Film Mode”, and then
press ENTER.
Press c/d to select “On”, and then press
ENTER.
Repeat steps 1 to 3 in Monochrome.
I/P setting
Adjusting the image and input signal can give you a
more beautiful picture.
Press a/b to select “I/P Setting”, and then
press ENTER.
Press c/d to select “Interlace” or
“Progressive”, and then press ENTER.
Repeat steps 1 to 3 in Monochrome.
NOTE
• The picture is progressive scan when Film Mode is “On”.
1
2
3
1
2
3
LC-AX3X(E)-e 05.11.18, 0:58 PM28