Sharp LTV-19w3 Flat Panel Television User Manual


 
23
Video Features
Progressive scan
Motion adaptive 3D de-interlacing
3D noise reduction
Inverse 3:2 pull down
Aspect Ratio Adjustment (Normal/Full/Zoom)
Dynamic Luminance Control (DLC) Function
Video Enhancement (Brightness/Contrast/Sharpness/Saturation/Hue)
Picture-in-Picture in D-Sub/DVI/YPbPr mode
Audio Features Built in audio amplifier and speakers; 3.5 watts x 2 channels
Mute
Multi-channel television sound (MTS)
Other Features
Closed caption
V-Chip
Sleep timer
Input Connectors
Rear:
Input 1: 1 Tuner antenna input
Input 2: 1 Video, 1 S-Video, left and right stereo audio
Input 3: 1 Y/Pb/Pr, left and right stereo audio
Input 4: 1 DVI, left and right stereo audio
Input 5: 1 D-Sub, left and right stereo audio
Output Connectors Rear: 1x 1/8” Mini-jack for Stereo audio line out
Remote Control Unit Infrared remote control
Accessory/Cables Infrared remote control
Power cord
Base Stand
2° down, 5° up tilting stand
Wall/Arm Mount Directly wall mountable or VESA 75mm hole pattern
Dimensions (w x h x d) inches Unit with base
Unit without base
Carton
: 18.6 x 15 x 8.3
: 18.6 x 15 x 3.75
: 21.18 x 18.5 x 6.38
Weight Unit Weight
Gross shipping weight
: 11.1 lbs
: ? Kg
AC Power Input Range 100~240V
AC
, 50/60Hz, 1.8 amps, universal
Regulatory Approvals FCC-B, UL, CSA (CUL), Energy Star
®
Lamp Life Time 40,000 hours
Environmental
Conditions
Operating
Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Operating Altitude
Storage Altitude
: 5°C to 35°C
: -20°C to 55°C
: 20 to 80% (no condensation)
: 20 to 85% (no condensation)
: 3,000 m
: 12,000 m
Troubleshooting
No power
Make sure DC cord is plugged into the back of the LCD TV.
ҏҏMake sure AC power cord is securely connected to the AC socket
Plug another electrical device (like a radio) to the power outlet to verify that the outlet is
supplying the proper voltage
Power is ON but no screen image
ҏҏAdjust brightness and contrast
Check Source settings
Wrong or abnormal colors
If any colors (red, green, or blue) are missing, check the video cable to make sure it is
securely connected. Loose or broken pins in the cable connector could cause an