Sharp PG-A10S Projection Television User Manual


 
15
Connections and Setup
Connecting the Projector to Other Devices
Before Connecting
Note
Before connecting, be sure to turn off both the projector and the devices to be connected. After making all
connections, turn on the projector and then the other devices.
When connecting a computer, be sure that it is the last device to be turned on after all the connections are
made.
Be sure to read the operation manuals of the devices to be connected before making connections.
This projector can be connected to:
A computer using:
An RGB cable and a ø3.5 mm audio cable (commercially
available) (See page 16.)
A DIN-D-sub RS-232C adaptor and an RS-232C
serial control cable (AN-C10RS) (sold separately)
(See page 20.)
Component video or audio-visual equipment:
A VCR, Laser disc player or other audio-visual
equipment (See page 18.)
A DVD player or DTV
* decoder (See page 19.)
*DTV is the umbrella term used to describe the new
digital television system in the United States.
Connecting the Power
Cord
Plug the supplied power cord into the
AC socket on the rear of the projec-
tor.
Power cord
Supplied
accessory
A10X_A10S#E_Print#p15_20.p65 03.2.4, 2:02 PM15