Sharp PN-465U Flat Panel Television User Manual


 
34
E
Specifications
Product Specifications
Model PN-465U
LCD element 46" wide (116.8 cm diagonal) ASV low-reflection black TFT LCD
Max. resolution (pixels) 1920 x 1080
Max. colors 16.77 M colors (8 bits/color)
Pixel pitch 0.53025 mm (H) x 0.53025 mm (V)
Vi
ewing angle 176° right/left/up/down (contrast ratio ≥ 10)
Screen active area inch (mm) 40-1/16 x 22-9/16 (1018.1 x 572.7)
Computer input signal Digital (DVI 1.0 standard-compliant), Analog RGB (0.7Vp-p) [75 ]
Sync signal Horizontal/vertical separate (TTL: positive/negative), Sync-on-green,
Composite sync (TTL: positive/negative)
Vi
deo color system NTSC (3.58 MHz)
Plug and play VESA DDC2B
Power management VESA DPMS, DVI DMPM
Input terminals PC/AV Digital DVI-D 24 pin (HDCP compatible) x 1
PC Analog Mini D-sub 15 pin, 3 rows x 1, BNC
*1*2
x 1
Audio 3.5 mm mini stereo jack x 1
AV
Composite video BNC x 1
Component BNC (Y, Cb/Pb, Cr/Pr)
*1
x 1
Audio RCA pin (L/R) x 1
Serial (RS-232C) D-sub 9 pin x 1
Output terminals PC/AV Digital DVI-D 24 pin x 1
*3
Audio RCA pin (L/R) x 1
Serial (RS-232C) D-sub 9 pin x 1
Speaker 7 W + 7 W [6 ]
Power requirement AC 120 V, 60 Hz
Operating temperature 32°F to 104°F (0°C to 40°C)
Operating humidity 20% to 80% (no condensation)
Power consumption 266 W (Input signal waiting mode: 6.5 W, Standby mode: 3.5 W)
Dimensions inch (mm) Approx. 43-13/16 x 5-1/2 x 25-7/8 (1,113 x 140 x 657) (excluding protrusions)
We
ight lbs. (kg) Approx. 78.3 (35.5) (excluding the temporary stand)
*1 Cannot be used simultaneously.
*2 Does not support plug and play.
*3 Connection is allowed with an HDCP-compatible device only. Does not support Repeater control function.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product improvement without prior notice. The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units
.