Filter
Top Products
28
Dimension: 140 X 215 mm
•
Saving broadcast TV channels into memory
1 Press MENU to access the MAIN MENU
screen, then press CH a/ s to move the “ ”
mark to “SET UP”.
2 Press VOL k/l to access the SET UP
screen, then press CH a/ s to move the “ ”
mark to “CH SETTING”.
3 Press VOL k/l to access the CH SETTING
screen.
4 Press CH a/ s to move the “ ” mark to “CH
SEARCH”, then press VOL k/l to access
the CH SEARCH screen.
To start:
Press VOL k. The tuner will search through
all available channels in your area and add
them into the TV memory.
To stop:
Press VOL l. CH SEARCH will stop at the
current channel and will not add any higher
channels.
5 Press MENU to exit.
Note:
• If you press VOL k again while in the CH SEARCH mode, auto-
program will start again, and the previously memorized channels will
be lost.
•
Adding weak or additional channels or erasing unwanted channels from TV memory
1 Press MENU to access the MAIN MENU
screen, then press CH a/ s to move the “ ”
mark to “SET UP”.
2 Press VOL k/l to access the SET UP
screen, then press CH a/ s to move the “ ”
mark to “CH SETTING”.
3 Press VOL k/l to access the CH SETTING
screen.
4 Press CH a/ s to move the “ ” mark to “CH
MEMORY”, then press VOL k/l to access
the CH MEMORY screen.
5 Use CH a/s or REMOTE KEYPAD to select
each desired channel to add or erase.
→
(START)
(STOP)
or
→
→
→
→
→
321
654
987
100
0
ENTER
Set Up (Continued)
(CH SETTING screen)
(CH SETTING screen)
(CH SEARCH screen)
(CH MEMORY screen)
→
27C241 28
AI /CABLER
EZ
SETUP
CH SEARCH
CH MEMORY
2
AR +T:
TO –P:
AIR
CH SEARCH
ST
S
1
AI /CABLER
EZ
SETUP
CH SEARCH
CH MEMORY
D+:
AIR
C
HMEMORY
ADTO
2
1
: