Sharp 27SC260 CRT Television User Manual


 
29
Dimension: 140 X 215 mm
Parent Control (VIEW TIMER) (Continued)
9 Enter a 4-digit secret No. using the REMOTE KEYPAD.
10
Press MENU to exit.
Example:
To restrict anybody from watching TV for more than 5 hours, after
watching the TV for 2 hours, your settings would look like the one on
the right.
You can choose to watch the 2 hours of TV as you wish. For example,
you could watch 1 hour of TV, turn the TV off for 30 minutes, then turn
the TV on and watch the remaining 1 hour of the VIEWING TIME.
To change the VIEW TIMER setting after registering a secret No.
1 Repeat steps 1 to 4 of How to set VIEW TIMER. Press VOL k/l,
and “INPUT SECRET No.” will be displayed.
2 Enter the 4-digit secret No. using the REMOTE
KEYPAD, and the VIEW TIMER access screen will
be displayed. Repeat steps 5, 6
.
Note:
When you choose the correct secret No., the VIEW TIMER access
screen is displayed. If the wrong secret No. is chosen, “SECRET No. IS
INCORRECT” is displayed. Input the secret No. again in this case.
To cancel the VIEW TIMER (While the TV set is OFF but the VIEW
TIMER is set.)
1 Turn on the TV; a blue screen message “TIME OVER” will appear. If
you do nothing, the TV will turn off in approximately 30 seconds.
2 Enter the 4-digit secret No. using the REMOTE
KEYPAD. When you choose the correct secret No.,
the VIEW TIMER is canceled. If the wrong secret No. is
chosen, “SECRET No. IS INCORRECT” is displayed.
Input the secret No. again in this case.
V I EWI NG
2H
T I ME
OFF
00
M
5H 00
M
T I ME
STATUS : O
N
V I EW T IME
R
VOL
VOL
+
I NPUT
1 2 3 4
SECRET No .
I NPUT
SECRET No .
SECRET IS I NCORRECTNo .
T IME OVER
I NPUT
SECRET No .
T IME OVER
I NPUT SECRET No .
I NPUT SECRET
No .
28-31.indd 29 11/23/05 2:14:28 PM