Sharp 32C230 CRT Television User Manual


 
29
Dimension: 140 X 215 mm
Saving broadcast TV channels into memory
1 Press MENU to access the MAIN MENU
screen, then press CH 8/9 to move the “[
mark to “SET UP”.
2 Press VOL +/ to access the SET UP screen,
then press CH 8/9 to move the “[” mark to
“CH SETTING”.
3 Press VOL +/ to access the CH SETTING
screen.
4 Press CH 8/9 to move the “[” mark to “CH
SEARCH”, then press VOL +/ to access the
CH SEARCH screen.
To start:
Press VOL +. The tuner will search through
all available channels in your area and add
them into the TV memory.
To stop:
Press VOL –. CH SEARCH will stop at the
current channel and will not add any higher
channels.
5 Press MENU to exit.
Note:
If you press VOL + again while in the CH SEARCH mode, auto-program
will start again, and the previously memorized channels will be lost.
Adding weak or additional channels or erasing unwanted channels from TV memory
1 Press MENU to access the MAIN MENU
screen, then press CH 8/9 to move the “[
mark to “SET UP”.
2 Press VOL +/ to access the SET UP screen,
then press CH 8/9 to move the “[” mark to
“CH SETTING”.
3 Press VOL +/ to access the CH SETTING
screen, then press CH 8/9 to move the “[
mark to “CH MEMORY”.
4 Press VOL +/ to access CH MEMORY.
5 Use CH 8/9 or REMOTE KEYPAD to select
each desired channel to add or erase.
(CH SETTING screen)
(CH SETTING screen)
(CH SEARCH screen)
AIR/ CABLE
CH SEARCH
CH MEMORY
EZ SETUP
CH SETTI NG
STOP START
CH SEARCH
AIR 10
AIR/ CABLE
CH SEARCH
CH MEMORY
EZ SETUP
CH SETTI NG
(START)
(STOP)
or
321
654
987
100
0
ENTER
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
Set Up (Continued)
32C230(29-30) 14/3/03, 11:11 AM29