Sharp 36C230 CRT Television User Manual


 
8
Dimension: 140mm x 215mm
When you turn on the TV for the first time, it will automatically
memorize the broadcasting channels.
Please perform the following instructions before pressing the
POWER button.
(1) Insert the batteries into the remote control. (See page 5)
(2) Connect the antenna cable to the TV set. (See pages 5, 6)
(3) Plug in the AC POWER cord to the wall outlet.
1 Press the POWER button on the TV set or on the Remote Control
to turn on the TV. The SELECT LANGUAGE screen will be
displayed.
2 Press CH 8/9 to select “ENGLISH”, “ESPAÑOL (SPANISH)” or
“FRANCAIS (FRENCH)”.
3 Press VOL +/ to access the EZ SETUP screen.
4 Press VOL +.
The tuner will automatically search for the
broadcasting and cable TV channels. (The CH No.
will automatically increase when it appears.)
If you want to stop the EZ SETUP process once it
has started, press VOL – and it will be canceled.
If you want to SET UP again, please refer to page
27 on SET UP.
To cancel EZ SETUP
Press VOL –.
5 Once EZ SETUP is complete, the lowest channel number
memorized will be displayed.
Note:
If EZ SETUP does not memorize all the channels in your region, please refer to page 28–30 for more
information on manually memorizing the channels using CHANNEL SETTING.
It may be difficult to PRESET when the broadcast signals are weak, the channel cycle frequency is
incorrect or frequency jamming is occurring around the area. Please refer to pages 28–30 for more
information on manually memorizing the channels using CHANNEL SETTING.
SELECT
ENGL ISH
FRANCAIS
SELECT:CH
SET :VOL
+–
/
/
ESPAÑOL
LANGUAGE
SELECT
ENGL ISH
FRANCAIS
SELECT:CH
SET :VOL
+–
/
/
ESPAÑOL
LANGUAGE
START
STOP START
SETUP?EZ
OR CABLE.CONNECT ANTENNA
STOP START
PLEASE WAIT
125
AUTO PROGRAMMING
2
CH
CH
POWER
TV
(EZ SETUP screen)
EZ SETUP during First Use
(On the Set)
POWER
(On the Remote Control)
(SELECT LANGUAGE screen)
(START)
(STOP)
POWER
CHANNEL
UP (a)/
DOWN (s)
VOLUME
(
k
)/(
l
)
32C231(08-09) 3/27/03, 11:13 AM8