Filter
Top Products
–
25
–
EN
9F21
4
Press the
K/L
buttons to select a desired
item, and then press the ENTER button.
5 Press the SETUP button.
¡The setup mode will be canceled and the ordinary
screen will appear.
Note
¡Be sure to press the SETUP button, or the setting
will not work.
¡You can also choose the item by pressing the num-
bers.
¡You can change the PANEL DISPLAY setting
(BRIGHT or DIMMER) by pressing the DIMMER
button on the remote control.
1
Press the SETUP button in STOP mode.
¡The setup screen will appear.
2 Press the K/L buttons to select DISPLAY
and then press the ENTER button.
3 Press the K/L buttons to select an item, and
then press the ENTER button.
DISPLAY SETTINGS
1.
LANGUAGE
2.
DISPLAY
3.
AUDIO
4.
PARENTAL
SET-UP
1.
LANGUAGE
2.
DISPLAY
3.
AUDIO
4.
PARENTAL
SET-UP
ANGLE ICON (Default: On)
Display or not display the Angle icon on the screen.
AUTO POWER OFF (Default: On)
Set or not set to turn off after the screen saver is started and
no keys are pressed for 35 minutes.
TV ASPECT
(Default : 4:3 LETTER BOX)
4:3 LETTER BOX : Wide screen with black bars on top
and bottom
4:3 PAN & SCAN : Full height picture, trimmed both
sides
16:9 WIDE : If wide screen TV is connected
PANEL DISPLAY (Default : BRIGHT)
Adjust the brightness of the display of the unit.
* Auto: Stays dim only during playback.
1.
TV ASPECT 4:3 LETTER BOX
2.
PANEL DISPLAY BRIGHT
3.
ANGLE ICON ON
4.
AUTO POWER OFF ON
SET-UP
DISPLAY CONTROLS
1.
TV ASPECT 4:3 LETTER BOX
2.
PANEL DISPLAY BRIGHT
3.
ANGLE ICON ON
4.
AUTO POWER OFF ON
SET-UP
DISPLAY CONTROLS
1.BRIGHT
2.DIMMER
3.AUTO
SET-UP
DISPLAY CONTROLS
PANEL DISPLAY
SET-UP
DISPLAY CONTROLS
1.
TV ASPECT 4:3 LETTER BOX
2.
PANEL DISPLAY BRIGHT
3.
ANGLE ICON ON
4.
AUTO POWER OFF ON
SET-UP
DISPLAY CONTROLS
1.
TV ASPECT 4:3 LETTER BOX
2.
PANEL DISPLAY BRIGHT
3.
ANGLE ICON ON
4.
AUTO POWER OFF ON