Filter
Top Products
–
19
–
EN
Cleaning the Cabinet
• Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasives.
Cleaning Discs
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a circular
motion.
• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or
antistatic spray intended for analogue records.
Cleaning the disc lens
• If the player still does not perform properly when it is operated while referring to the relevant sections and to “TROU-
BLESHOOTING GUIDE” in this Operation Manual, the laser optical pickup unit may be dirty. Consult your dealer or a
Sharp Authorized Service Center for inspection and cleaning of the laser optical pickup unit.
Disc Handling
• Use discs which have the following logos on them. (Optical audio digital discs.)
• Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is not used.
MAINTENANCE
PRODUCT TYPE
DVD Player
DISCS (PLAYBACK COMPATIBILITY)
DVD Video
Audio CD
CD-RW / R
DVD-RW / R, DVD+RW / R
OUTPUT SIGNAL FORMAT
NTSC color
FREQUENCY RESPONSE
DVD (linear sound) : 20 Hz to 20 kHz (sample rate: 48 kHz)
20 Hz to 44 kHz (sample rate: 96 kHz)
CD : 20 Hz to 20 kHz
SIGNAL-TO-NOISE RATIO (S/N RATIO)
CD : 120 dB (JEITA)
DYNAMIC RANGE
DVD (linear sound) : 102 dB
CD : 99 dB (JEITA)
TOTAL DISTORTION FACTOR
DVD : 0.0025% (JEITA)
CD : 0.003% (JEITA)
WOW AND FLUTTER
Below the measurement limitation (
± 0.001 % W PEAK)
(JEITA)
CONNECTIONS
Video output
One RCA connector, 1 Vpp (75
Ω
)
Component video output One pin jack (Y), 1 Vpp (75 Ω)
Two pin jacks (CR/PR, CB/PB),
700mVpp (75 Ω)
S-Video output Mini DIN 4-pin jack (75 Ω)
Analog audio output Two RCA connectors (one left
channel, one right channel)
2 Vrms (47 kΩ)
Coaxial digital audio output One pin jack, 500mVpp (75 Ω)
Optical digital audio output Optical connector
POWER SOURCE
120V AC +/- 10 %, 60 Hz +/- 0.5 %
POWER CONSUMPTION
10 W (standby: 0.8 W)
OPERATING TEMPERATURE
41 F° to 104 F° (5 °C to 40 °C)
DIMENSIONS
W: 17 1/8” (435 mm)
H: 2” (51 mm)
D: 8 5/16” (211 mm)
WEIGHT
Approx. 2.9 lbs. (1.3 kg)
• Designs and specifications are subject to change
without notice.
• If there is a discrepancy between languages, the
default language will be English.
SPECIFICATIONS
Make your contribution to the environment!!!
• Used up batteries do not belong in the dust bin.
• You can dispose of them at a collection point for used up batteries or special waste.
Contact your council for details.
Recordable
ReWritable
For the location of the nearest Sharp Authorized Service Center, or to obtain product literature, accessories, supplies or cus-
tomer assistance, please call 1-800-BE-SHARP (1-800-237-4277) or visit SHARP’s website (http://www.sharpusa.com).
SERVICE INFORMATION (For the U.S.)