Sharp LC 10A3U Flat Panel Television User Manual


 
16
1 Press the button.
2 Press the
5
button.
BASIC OPERATION (Continued)
Changing the Channels
Changing channels using the CHANNEL SELECT on the remote control
To select a one-digit channel (e.g.,
Channel 5):
Basically, the 2-digit entry is used.
To handle the increasing number of channels available, this LCD TV set allows you to select up to
125 positions (Channels 1 to 125). One-digit, two-digit and three-digit methods of selection can be
used. Follow the procedure shown below to select channels.
1 Press the button.
2 Press the button.
3 Press the
5
button.
To select a three-digit channel (e.g.,
Channel 115):
Complete this procedure within 3 seconds,
otherwise the selection will not be made.
Changing channels with the CH (])/([) on the remote control.
Press the CH (]) and the channels change in the order shown below:
1 2 3 . . . 125 1 2 3 . . .
Press the CH (
[) button and the channels change in the order shown below:
3 2 1 . . . 125 . . . 3 2 1 . . .
Air CH (]) 2 3 . . . 68 69 2 3 . . .
CH ([) 3 2 69 68 . . . 3 2 . . .
STD CH (]) 2 3 . . . 124 125 2 3 . . .
CH ([) 3 2 . . . 125 124 . . . 3 2 . . .
HRC CH (]) 1 2 3 . . . 124 125 1 2 . . .
CH ([) 1 125 124 . . . 3 2 1 . . .
IRC CH (]) 1 2 3 . . . 124 125 1 2 . . .
CH ([) 2 1 125 124 . . . 3 2 1 . . .
POWER
TV/VIDEO
CH
CH
8
9
0
DISPLAY
LCDTV
123
456
7
MENU
FLASHBACK
MUTE
CHANNEL
SELECT
Note: