Filter
Top Products
14
BASIC OPERATION (Continued)
Control section of main unit
1 Slide the MAIN POWER switch,
located on the rear side of the main
unit to ON.
2 The Power indicator instantane-
ously changes from red to green
and the main unit is turned on.
▼ ON-screen display
Turning on POWER
Notes:
Switching TV/VIDEO AV1/AV2/TV Mode
Note:
Input mode indication disappears after
several seconds.
AV1 mode
AV2 mode
TV mode
1 Turn on the power of the con-
nected video equipment.
2 Press the TV/VIDEO and select the
applicable input source. The screen
displays AV1, AV2 or TV mode at
the upper right corner each time
TV/VIDEO is pressed.
■ AV input mode indication remains for
five seconds.
• AV1: Video equipment connected to the
AV1 input terminals.
S-video input terminals is
additionally provided for the AV1
input. If both S-video terminal and
normal video terminals are
connected with cables, the S-
video input terminal take is
selected as the high priority.
The display of the AV1 mode
indicates AV1 or COMPONENT
with the adjustment of PRESET
setting.
• AV2: AV2 mode is used to adjust to
preset setting and can select IN of
OUT mode. AV2 indication does
not display when the mode is
selected to OUT.
Notes:
Power/Standby indicator
POWER
TV/VIDEO
CH
CH
8
9
0
DISPLAY
LCDTV
1 23
456
7
MENU
FLASHBACK
MUTE
POWER
TV/VIDEO
MAIN
POWER
LC-15A2U(1-17)Eng.pm65 7/23/00, 10:27 AM14