Filter
Top Products
16
AV2
COMPONENT
12
AV1
BASIC OPERATION (Continued)
Control section of main unit
1 Press MAIN POWER, located on
the upper side of the main unit, to
on.
2 The POWER indicator instantane-
ously changes from red to green
and the main unit is turned on.
▼ On-screen display
2
STEREO
<
ON AIR
SAP
M
ONO
Turning on POWER
Notes:
Switching TV/VIDEO [AV1/AV2/COMPONENT/TV] Modes
A
• The input mode indication disappears after
several seconds.
AV1 mode
AV2 mode
TV mode
1 Turn on the power of the con-
nected video equipment.
2 Press TV/VIDEO and select the
applicable input source. The
screen displays AV1, AV2, COM-
PONENT or TV mode each time
TV/VIDEO is pressed.
A
• The AV input mode indication remains
for 3 seconds.
• AV1: Video equipment connected to the
AV1 input terminals.
An S-Video input terminal is
additionally provided for the AV1
input. If both the S-Video terminal
and normal video terminals are
connected with cables, the S-
Video input terminal takes priority.
• AV2: AV2 mode is used to adjust the
preset settings and IN or OUT
can be selected. AV2 indication is
not displayed when OUT is
selected. (For details on setting
AV2-IN/OUT, see page 26.)
• COMPONENT:
Video equipment connected to the
COMPONENT input terminals.
CHVOL
POWER
MENU
DISPLAY
MUTE
SLEEP PIC. FLIP
BRIGHT CC TV/VIDEO
FLASHBACK
MAIN POWER
CHVOL
MENU
MAIN POWER
TV/VIDEO
COMPONENT mode
TV/VIDEO
POWER indicator