Filter
Top Products
GENERAL SPECIFICATIONS
Television system: NTSC-M
TV Standard
Closed Caption System: §15.119/FCC
Channel coverage
VHF: 2 ~ 13
UHF: 14 ~ 69
CATV: 2 ~ 13, A ~ W,
W+1 ~ W+84,
A-5 ~ A-1, 5A
Tuning System: 181 channel
frequency synthesized
tuning system
Channel access: Direct access keyboard,
programmable
scan and up/down
Terminals
Antenna input: VHF/UHF/CATV
75 ohm unbalanced
(F-type)
S-Video input: Mini DIN 4-pin jack
Video input: RCA connector x 1
Audio input: RCA connector x 4
Component video input:
One pin jack (Y), 1Vpp (75 ohm)
Two pin jacks (P
R
)/(P
B
), 700mVpp (75 ohm)
Headphone: 1/8" stereo (3.5 mm)
Stereo Sound System
2 speakers
2 ways AV input
Sound output: 1W, 8 ohm x 2
OTHER SPECIFICATIONS
Remote control: Digital encoded
infrared light system
Power requirements: AC120V, 60Hz
[LC-13AV1U]
Power consumption (Maximum): 56W
LCD: 13"
Dimensions (H x W x D):
12-3/4
"
x 13
"
x 3-13/16
"
(including the table stand) (325mm x 330mm x 97mm)
Weight: 6.8 lbs. (3.1kg)
(including the table stand)
[LC-15AV1U]
Power consumption (Maximum): 65W
LCD: 15"
Dimensions (H x W x D):
14
"
x 18-9/16
"
x 10-1/4
"
(including the table stand) (356mm x 472mm x 260mm)
Weight: 10.6 lbs. (4.8kg)
(including the table stand)
[LC-20AV1U]
Power consumption (Maximum): 73W
LCD: 20"
Dimensions (H x W x D):
17-5/16
"
x 23-5/8
"
x 12-5/8
"
(including the table stand) (439mm x 600mm x 320mm)
Weight: 15.7 lbs. (7.1kg)
(including the table stand)
•Designs and specifications are subject to
change without notice and without our
legal obligation.
•If there is a discrepancy between languages,
the default language will be English.
LCDTV
123
4
78
0
9
100
56
Remote control unit
(UREMT21SH001/
9HSUREMT21SH001)
Batteries ("AA" x 2)
SPECIFICATIONS
MAINTENANCE
SUPPLIED ACCESSORIES
TROUBLESHOOTING GUIDE
Sometimes a performance problem can be easily solved by checking seemingly apparent but often over-
looked possibilities. Before arranging for service, check these items. It could save your time and money.
QUICK SERVICE CHECK LIST
PROBLEM
POSSIBLE REMEDY
Try a new channel, if OK, then possible station trouble.
Is TV plugged in?
Power at outlet?
Is TV’s POWER button on?
Is antenna connected to terminal on the back of the set?
If outside antenna is being used, check for broken wire.
Check for local interference.
Turn off with POWER button and then turn it on after about a minute.
Adjust COLOR control.
Adjust CONTRAST & BRIGHT control.
Check batteries in Remote Control.
Move the TV away from the nearby appliances which have Magnetism.
Turn off using the POWER button, then turn it on again 30 minutes or so later.
Temperature around is too low.
Life of the Back Light is approximately 50,000 hours. Ask the Service Center to replace.
It is quality of the LCD Panel.
Remote Control Doesn’t Work
Bars On Screen
Picture Distorted
Picture Rolls Vertically
No Color
Poor Reception on Some Channels
Weak Picture
Lines or Streaks in Picture
Ghosts in picture
Picture Blurred
Sound OK, Picture Poor
Picture OK, Sound Poor
No Picture or Sound
Different color marks on screen
Black or Luminous point on Screen
Closed Caption Problem Possible Remedy
My TV is showing captions that are
misspelled.
My TV will not show the text in its entirety
or there is a delay of what is being said.
My captions are scrambled with white
boxes on the TV screen.
My program guide listed a TV show as
being closed captioned
but none of the captions were displayed.
My prerecorded videotape does not show
any captions. The tape box mentions it
being closed captioned.
My TV screen shows a black box on certain
channels.
You are watching a live broadcast and spelling errors made by the
closed captioning production company may pass through uncorrect-
ed. A prerecorded program will not show any misspelled words
because of the normal time available for editing the captions.
Captions that are delayed a few seconds behind the actual dialogue
are common for live broadcasts. Most captioning production compa-
nies can display a dialogue to a maximum of 220 words per minute.
If a dialogue exceeds that rate, selective editing is used to insure that
the captions remain up-to-date with the current TV screen dialogue.
Interference caused by building, power lines, thunderstorms, etc.
may cause scrambled or incomplete captions to appear.
Broadcasters may at times use a time compression process to the
actual program so that additional advertising time can be given.
Since the decoder cannot read the compressed information, captions
will be lost.
The videotape was either an illegal copying or the tape duplicating
company accidentally left out the captioning signals during the
copying process.
You are in the TEXT mode. Select CAPTION mode or CAPTION
[OFF].
Operation Manual
(1EMN20178/9HS1EMN20178)
(1EMN20179/9HS1EMN20179)
CABINET CLEANING
●
Wipe the front panel and other exterior sur-
faces of the TV with a soft cloth immersed
in lukewarm water and wrung dry.
●
Never use a solvent or alcohol. Do not
spray insecticide liquid near the TV. Such
chemicals may cause damage and discol-
oration to the exposed surfaces.
PICTURE SCREEN CLEANING
If the LCD panel should require cleaning, wipe
it with a cotton or soft cloth. Before cleaning
the picture screen, disconnect the power cord.
●
When you select the rating category and set it to [BLOCK], the higher rating will turn to
[BLOCK] automatically. Also, the lower rating will turn to [VIEW] automatically.
●
When you turn "G" to [BLOCK] or [VIEW], the all ratings will turn to [BLOCK] or [VIEW]
automatically.
●
When you turn "X" to [VIEW], then all ratings will turn to [VIEW] automatically.
6) Press the MENU button to exit the menu.
[TV RATING SET UP]
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the CH ▲ or ▼ button to point to "V-CHIP SET UP".
Then press the VOL + button.
3) Use the number buttons to enter 4-digit access code. The default access
code is 0000. If you have not set up your personal access code, you should
use 0000.
4) Press the CH ▲ or ▼ button to point to "TV RATING". Then press the
VOL + button.
5) Press the CH ▲ or ▼ button to point to your desired item.
Then press the VOL + button to select [BLOCK] or [VIEW].
●
When you select the rating category and set it to [BLOCK], the higher rating will turn to
[BLOCK] automatically. Also, the lower rating will turn to [VIEW] automatically.
●
When you turn "TV-Y" to [BLOCK] or [VIEW], then all ratings will turn to [BLOCK] or
[VIEW] automatically.
●
When you turn "TV-MA" to [VIEW], then all ratings will turn to [VIEW] automatically.
6) Press the MENU button to exit the menu.
[V-CHIP SET UP SUB RATINGS]
When you select TV-Y7, TV-PG, TV-14 or TV-MA and you press the VOL + button, the sub-rat-
ings will appear on the TV screen.
If you select the rating category (example: TV-PG) and set it to [BLOCK] or
[VIEW], the sub-ratings (example: V for Violence) will turn to [BLOCK] or
[VIEW] automatically.
You can set the sub-ratings to [BLOCK] or [VIEW] individually when the rat-
ing category is set to [BLOCK]. To set the sub-ratings individually, follow the
steps below.
●
When you select [TV-Y7]:
Press the CH ▲ or ▼ button to select "FV" (Fantasy Violence). Then press
the VOL + button to select [BLOCK] or [VIEW].
●
When you select [TV-PG], [TV-14] or [TV-MA]:
Press the CH ▲ or ▼ button to select "D" (Suggestive Dialog), "L"(Coarse
Language), "S"(Sexual Situation) or "V" (Violence). Then press the VOL +
button to select [BLOCK] or [VIEW].
Note: When you select [TV-MA], "D" does not appear on the TV screen.
●
The sub-ratings which set to [BLOCK] appear next to the rating category in
the “TV RATING” menu.
●
Press the MENU button to exit the menu.
[V-CHIP ACCESS CODE]
To change access code, follow steps.
1) Press the MENU button, then press the CH ▲ or ▼ button to select "V-
CHIP SET UP". Press the VOL + button to continue.
2) Press the number buttons to enter your old access code. If you have never
set up your personal access code, use 0000.
3) Press the CH ▲ or ▼ button to select "CHANGE CODE". Then press the
VOL + button to continue.
4) Use the number buttons to enter your desired access code in the NEW
CODE space. Then enter the same code in the CONFIRM CODE space.
Your new access code is set. You will return to the "V-CHIP SET UP".
If the code in the CONFIRM CODE space does not match the code in the
NEW CODE space, repeat step 4, making sure you enter the same new code
exactly in the CONFIRM CODE space.
NOTES:
●
If a power failure occurs, the default code, 0000, will be the active access
code again.
●
If you connect the power cord to an AC outlet that is controlled by a wall
switch, your personal access code will be erased every time you turn off the
power at the wall switch. The default code will be the active code again.
[IF YOU FORGET YOUR ACCESS CODE]
You should restore the access code to default code, 0000. To restore 0000 as your personal access
code, unplug the TV’s power cord for 10 seconds, then plug it in again.
B TV-Y [VIEW]
TV-Y7 ( ) [VIEW]
TV-G [VIEW]
TV-PG( )[VIEW]
TV-14 ( )[VIEW]
TV-MA( )[VIEW]
<Selection> <Rating Category Explanations>
• TV-Y: Appropriate for all children
• TV-Y7: Appropriate for children seven and older
• TV-G: General Audience
• TV-PG: Parental Guidance suggested.
• TV-14: Unsuitable for children under 14
• TV-MA: Mature audience only
TV-Y7 [BLOCK]
B FV [BLOCK]
TV-Y [VIEW]
TV-Y7 ( ) [VIEW]
B TV-G [BLOCK]
TV-PG(DLSV)[BLOCK]
TV-14 (DLSV)[BLOCK]
TV-MA( LSV) [BLOCK]
TV-PG [BLOCK]
B D [BLOCK]
L [BLOCK]
S [BLOCK]
V [BLOCK]
The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active
pixels may appear as a tiny spec of color. This in not to be considered a defect in the LCD screen.
- V-CHIP SET UP -
TV RATING
MPAA RATING
CHANGE CODE
OPERATION
MANUAL
OPERATIONS (Continued)
ACCESS CODE
– – – –
- TV SET UP -
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
TV SOUND [MAIN]
BACK LIGHT [BRIGHT]
SLEEP [ 0]
MINUTE
- V-CHIP SET UP -
TV RATING
MPAA RATING
CHANGE CODE
ACCESS CODE
– – – –
NEW CODE
– – – –
CONFIRM CODE
– – – –
<Selection> <Rating Category Explanations>
• G: General Audience
• PG: Parental Guidance suggested.
• PG-13: Unsuitable for children under 13
• R: Restricted; under 17 requires accompanying parent or adult guardian
• NC-17: No one under 17 admitted
• X: Mature audience only
B G [VIEW]
PG [VIEW]
PG-13 [VIEW]
R [VIEW]
NC-17 [VIEW]
X [VIEW]
L0170UA_0271UB_0371UB_EN.qx3 04.8.31 3:36 PM Page 4