34
Setting the input source (i.LINK)
If you want to receive an analog signal from the i.LINK device, you need to also use INPUT 1, INPUT 2, INPUT 3,
INPUT 4 or INPUT 5 to connect the i.LINK device to the TV and follow the steps below to designate the INPUT you
are using.
Example: a Digital STB/Digital TV connected to the TV using i.LINK terminal and INPUT 2
Press
c
/
d
to select “Digital Setup”.
Press
a
/
b
to select “i.LINK Setup”, and
then press ENTER.
Press
a
/
b
to select “Input Select”, and then
press ENTER.
Press MENU and the MENU screen displays.
Using external equipment
1
2
4
3
Press
a
/
b
to select the input source.
5
Press MENU to exit.
6
i.LINK Autoswitch
Input Select
Standby Mode
Recording Mode
INPUT 1
INPUT 2
INPUT 3
INPUT 4
INPUT 5
i.LINK cable
(commercially available)
Digital TV STB
(Example)
AV cable
(commercially available)