25
TROUBLESHOOTING
Problem Check item Pages
No image on screen, and
no sound from speakers.
• Make sure that the AC power cord plug is securely
inserted in AC power outlet and AC adapter.
• Make sure that the AC adapter’s DC output is securely
connected to main unit’s DC input terminal.
• Make sure that the main power switch of the main unit is
on.
• Make sure that the AV input is properly set.
• Make sure that the cables are correctly connected to
rear terminal section of LCD monitor.
• Check to see if the batteries in the remote control have
sufficient power.
• Make sure that the unit is not in the standby mode
(power indicator is red).
Speakers produce sound,
but no image on screen.
• Make sure that the cables are correctly connected.
Image is too light or
improperly tinted.
• Check COLOR and TINT adjustments. (NTSC ONLY)
• Check CONTRAST and BLACK LEVEL adjustments.
• Check RED-BLUE adjustments.
• Make sure that the VCR connection cord is correctly
connected to the COMPONENT terminal.
Image is displayed, but no
sound from speakers.
• Make sure that the cables are properly connected to
rear terminal section of LCD monitor.
• Check the volume adjustment.
• Make sure that the sound is not muted.
• Make sure that the headphones are not connected.
Image is too dark.
• Check to see if BRIGHTNESS is set to DARK.
• Check CONTRAST and BLACK LEVEL adjustments.
• Lamp may have reached the end of its life. (Contact a
Sharp service shop for a lamp replacement.)
No colors on image.
• Check COLOR adjustment.
• Check the color system setting.
• Make sure that the VCR connection cord is correctly
connected to P
B and PR of the
COMPONENT terminal.
8
12
12
8
13
20, 21
17
13
13
22
18
17
• Check to see if the batteries in the remote control
have sufficient power.
• Make sure that (+) and (–) side of batteries are
properly positioned in remote control.
• Make sure that the remote sensor window is not
under strong fluorescent lighting.
Remote control does not work.
8
17
17
8
17
LC-15M4U(20-28)Eng.p65 01.7.24, 5:17 PM25