Filter
Top Products
SUPERIMPOSE DISPLAY
Selecting the Superimpose Display
You can select to display or not the date, time, tape
speed mode and number of alarm recordings.
1
Turn the power on to all devices used.
2
Press the MENU button to display the MAIN MENU.
3
Turn the JOG dial to select the “2.DISPLAY/SW
OUT SET” line, then turn the SHUTTLE ring
clockwise.
ø The (DISPLAY/SW OUT SET) menu appears.
<DISPLAY@SET>@@@@SET@UP
DATE@@@@@@@@@@@@@Y
TIME@@@@@@@@@@@@@Y
SPEED@@@@@@@@@@@@Y
ALARM@COUNT@@@@@@Y
<SW@OUT@SET>
TIMING@@@@@@@@@@@FIELD
FIELD@@@@@@@@@@@@1
8H@MODE@@@@@@@@@@Y
4 Turn the SHUTTLE ring clockwise.
5
Turn the JOG dial to select the desired mode, then
turn the SHUTTLE ring clockwise.
SET UP . . . . . . . . . . . . Set each item (Individual)
ALL Y . . . . . . . . . . . . . . To set all items to “Y”
ALL N . . . . . . . . . . . . . . To set all items to “N”
ø If using the “SET UP” setting, continue with
steps 6 to 8.
6
Turn the JOG dial until the item to be changed is
highlighted, then turn the SHUTTLE ring clockwise.
7
Turn the JOG dial to set “Y” (displayed) or “N” (not
displayed), then turn the SHUTTLE ring clockwise.
DATE . . . . . . . . . . . . . . The date appears
TIME. . . . . . . . . . . . . . . The time appears
SPEED. . . . . . . . . . . . . The recording /playback
speed mode appears
ALARM COUNT. . . . . . The number of alarm
recordings appears
8
Repeat steps 6 and 7 when setting other items.
9
When finished, press the MENU EXIT button.
NOTE:
œ When the ON SCREEN button is pressed and the
display appears, the items for which “Y” have been
set are recorded. The items for which “N” was set at
step 7 above are not recorded.
Changing the Superimpose Display
Position
1
Turn the power on to all input devices to the VCR.
ø The superimpose display appears.
ø If the superimpose display does not appear,
press the ON SCREEN button. The display will
be turned on and off alternately each time the
ON SCREEN button is pressed.
10-15-2002@TUE@000
15:20:00@@@@@8
2
To change the display position, press the SHIFT «
(or ]) button.
ø The display will move towards the right (or the
bottom).
NOTES:
œ If the SHIFT « (or ]) button is kept pressed for 1
second or more, the display will move at a faster
speed.
œ The display position cannot be changed during
recording.
RF4QR/NA (SRT-8960 GB) Wed. May, 08/2002
English
13