Filter
Top Products
ON-SCREEN MENU
Main Menu
To access on-screen menu
1
When no menu is displayed on-screen, press the
MENU button.
ø The MAIN MENU appears.
MAIN MENU
<MAIN@MENU>
1.LANGUAGE/CLOCK@SET
2.DISPLAY/SW@OUT@SET
3.GENERAL@SET
4.WARNING@OUT/CONTR.SET
5.ALARM/SERIES@REC@SET
6.TAPE@MANAGEMENT
7.TIMER@SET
8.HOLIDAY@SET
9.OTHERS
2 Press the MENU EXIT (or MENU) button to return to
the monitor screen.
Using the JOG dial and SHUTTLE ring
for settings
JOG dial
Put the tip of your index finger into the depression, then
turn the dial in any direction.
œ When the display is highlighted in a sub-menu, turn
the dial to select the setting item.
œ When the display is highlighted in a MAIN MENU,
select a sub-menu.
œ While the display is flashing, turn the dial and the
selected data setting will change or the selected
setting value will increase or decrease.
SHUTTLE ring
œ When a menu is being displayed, turn the ring 10° or
more clockwise to change the selected setting item
from highlighted to flashing.
œ After making the setting, turn the ring clockwise to
save the setting and move to the next setting.
œ When a MAIN MENU is being displayed, turn the ring
clockwise and the sub-menu for selection will appear.
œ When a sub-menu is being displayed, turn the ring
counterclockwise and the MAIN MENU will appear.
œ If there are several items on one line, turn the ring
clockwise to move to the next item (on the right) and
confirm the setting. Turning the ring counterclockwise
will restore the original setting condition and move to
the previous item (on the left).
Sub-menus
To enter or modify settings within a sub-menu
1
When a MAIN MENU is being displayed, turn the
JOG dial to select one of the sub-menus, then turn
the SHUTTLE ring clockwise.
ø The selected sub-menu appears.
2
Turn the JOG dial to move the selection to the
desired setting, then turn the SHUTTLE ring
clockwise.
ø The selected item flashes.
3
Turn the JOG dial to enter or modify the setting.
4
Press the MENU EXIT button to save the settings
and return to the monitor screen.
LANGUAGE/CLOCK SET menu
<LANGUAGE/CLOCK@SET>
*LANGUAGE-LANGUE-IDIOMA
@@@@@@@@@@@@@@@ENGLISH
*CLOCK@SET
@01-01-2002@TUE@00:00:00
*DAYLIGHT@SET@@@@@NO@USE
@@@@@@WEEK@@@MONTH@TIME
@ON@@@1ST-SUN@@04@@02:00
@OFF@@LST-SUN@@10@@02:00
DISPLAY/SW OUT SET menu
<DISPLAY@SET>@@@@SET@UP
DATE@@@@@@@@@@@@@Y
TIME@@@@@@@@@@@@@Y
SPEED@@@@@@@@@@@@Y
ALARM@COUNT@@@@@@Y
<SW@OUT@SET>
TIMING@@@@@@@@@@@FIELD
FIELD@@@@@@@@@@@@1
8H@MODE@@@@@@@@@@Y
GENERAL SET menu
<GENERAL@SET>
TAPE@IN@MODE@@@@@STOP
TAPE@END@MODE@@@@REW
CLOCK@ADJUST@@@@@01:00
THREAD@CHECK@@@@@N
VIDEO@LOSS@@@@@@@N
CLOG@DETECT.@@@@@N
REMOTE@@@@@@@@@@@MENU
VIDEO@@@@@@@@@@@@COLOR
VERTICAL@SYNC@@@@Y
TAPE@@@@@@@@@@@@@T-160
RF4QR/NA (SRT-8960 GB) Wed. May, 08/2002
English
9