Sharp TMAN-A047WJZZ Flat Panel Television User Manual


  Open as PDF
of 2
 
Connecting an Antenna/Cable
1. A 75-ohm system is generally
a round cable with F-type
connector that can easily be
attached to a terminal without
tools (commercially available).
2.A 300-ohm system is a fl at
“twin-lead” cable that can be
attached to a 75-ohm terminal
through a 300/75-ohm adapter
(commercially available).
3. A separate VHF/UHF antenna
has two antenna cables. Use
a combiner (commercially
available) to connect the
antenna cables to a 75-ohm
terminal.
Connecting an HD Cable/Satellite Set-top Box
For information on the antenna type, see the operation manual of your TV.
Connecting a Cable/Satellite Set-top Box
Connecting a Cable/Satellite Set-top Box and VCR
The above is a connection example. For information on connecting external equipment to the
TV, see the operation manual of the equipment.
Check the type of antenna cable you are using.
(for receiving cable-TV without a set-top box, including unscrambled cable HD channels, or
off-air HDTV broadcasts)
Connecting Multiple Devices to the TV
Back panel surface inputs
Back panel
horizontal
inputs
Back panel
vertical inputs
DVI OUT
AUDIO
RGB
or
DVI-HDMI conversion cable
ø3.5 mm stereo
minijack cable
RGB cable
(D-sub 15-pin cable
or VGA cable)
PC
You can use the VIDEO terminal with a component cable.
Connecting an HD Cable/Satellite Set-top Box, Blu-ray Disc/DVD Player and Amplifi er
HDMI
DIGITAL
AUDIO
DIGITAL
AUDIO
TV
HDMI
LINE OUT
DIGITAL
AUDIO
IN
OUT
IN
Back panel
horizontal inputs
Back panel
vertical inputs
HD Cable/
Satellite
set-top box
Splitter
Cable
Blu-ray disc/
DVD player
or
You can connect the TV
using a splitter only when
the connection involves a
cable set-top box. When
you use the satellite
set-top box, connect a
dedicated cable directly to
the satellite set-top box.
Surround System/
AV amplifier
Cables required:
Coaxial cable
HDMI-certifi ed cable
Optical fi ber cable
ø3.5 mm stereo minijack to RCA
audio cable
Cables required:
Coaxial cable
Composite cable
The above is a connection example. For detailed information on the connection, see the
operation manual of the equipment.
■
When using HDMI cable (HDMI 1, 2, 3 or 4):
The HDMI (High Defi nition Multimedia Interface) terminal is
an audio-video interface that enables a connection for audio
and video signals using a single cable. The HDMI terminal
supports high-resolution video input.
• For connecting the TV to external equipment, use commercially available cables.
• To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV.
IN
OUT
VCR
LINE OUT
IN
OUT
LINE
OUT
LINE
IN
Back panel
horizontal inputs
You can connect the TV using
a splitter only when the
connection involves a cable
set-top box. When you use the
satellite set-top box, connect
a dedicated cable directly to
the satellite set-top box.
Back panel
surface inputs
Cable/Satellite
set-top box
Splitter
VCR
Cable
AUDIO-R (Red)
VIDEO
(Yellow)
AUDIO-L (White)
When connecting the
TV without the use of
a cable/satellite set-
top box, connect the
antenna cable to the
RF-IN terminal on the
VCR.
The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products.
ENGLISH
Back panel
vertical inputs
HDMI
LINE OUT
IN
OUT
Cable
■
When using DVI-HDMI conversion cable (HDMI 2):
When using a DVI-HDMI conversion cable, you should
make an analog audio connection. In this case, in
addition to connecting a DVI-HDMI conversion cable to
the HDMI 2 terminal, connect a ø 3.5 mm stereo minijack
cable to the AUDIO IN terminal and set "Audio Select" to
"HDMI+Analog".
Back panel
horizontal inputs
Back panel
vertical inputs
IN
OUT
AUDIO DVI
LINE OUT
Cable
■
When using Component cable (COMPONENT):
Back panel
surface inputs
IN
OUT
COMPONENT OUT
AUDIO-R (Red)
AUDIO-L (White)
P
R
(Red)
Y (Green)
P
B
(Blue)
Cable
When you connect external equipment using a DVI-HDMI conversion
cable or when you connect ARC-compatible equipment, use HDMI 1.
Connecting a PC
The above is a connection example. For information on connecting external equipment to the
TV, see the operation manual of the equipment.
Coaxial cable
Home Antenna
terminal (75-ohm)
300-ohm
twin-lead cable
75-ohm coaxial cable
IN OUT
Combiner
or
300/75-ohm adapter
F-type connector
300-ohm
twin-lead cable
300-ohm
twin-lead cable
75-ohm
coaxial cable (round)
Cable TV lead-In
Cable
IN
OUT
LINE OUT
VIDEO (Yellow)
AUDIO-L (White)
AUDIO-R (Red)
Back panel
surface inputs
 previous