Filter
Top Products
E-24
Operation
All image adjustment items are returned to the factory preset
settings.
Picture Adjustments
Adjusting the Picture
You can adjust the projector’s picture to your prefer-
ences with the following picture settings.
Description of Adjustment Items
Projector
For less contrast
For less brightness
For weaker red
For weaker blue
For less color intensity
Skin tones become purplish
For less sharpness
Selected item
For more contrast
For more brightness
For stronger red
For stronger blue
For more color intensity
Skin tones become greenish
For more sharpness
ƒ button ∂ button
Contrast
Bright
Red
Blue
Reset
Color
Tint
Sharp
(GUI) On-screen Display
INPUT 1 or 2 (COMPONENT) mode
•“Signal Type” does not appear when the INPUT 1
(COMPONENT) mode is selected.
•“Progressive” only appears when receiving a 480i signal in
the INPUT 2 (COMPONENT) mode.
•“Color”, “Tint” and “Sharp” do not appear in the INPUT 2
(RGB) mode.
•“Tint” does not appear when receiving “PAL”, “SECAM”,
“PAL M”, “PAL N“ or “PAL (60Hz)” in the S-VIDEO or VIDEO
mode.
1 Press MENU.
2 Press ∂/ƒ to select “Picture1” or “Picture2” in
INPUT 1 or 2 (COMPONENT), S-VIDEO or VIDEO
mode, or to select “Picture” in INPUT 2 (RGB)
mode, and then press ENTER.
3 Press ∂/ƒ to select a specific adjustment item,
and then press ENTER.
4 Press ∂/ƒ to move the mark of the selected
adjustment item to the desired setting.
5 To exit from the GUI, press MENU.
• To reset all adjustment items, select “Reset”, and then press
ENTER.
• The adjustments can be stored separately in the INPUT 1,
INPUT 2, S-VIDEO and VIDEO modes.
Remote control
S-VIDEO or VIDEO mode
INPUT 2 (RGB) mode
ON/OFF
POWER
LAMP
TEMP.
KEYSTONE
INPUT
BACK ENTER MENU
PICT MODE
VOL
POWER
MUTE
BACK
MENU
ENTER
2, 3, 4
2, 3
1, 5