Sherwood BDP-5004 Blu-ray Player User Manual


 
14
5.4.2 BD-Live Internet Access: Control BD player accessing internet
Limit access : Only allow the inserted Blu-Ray disk to download content from a
BD-Live website which has a valid online certificate. This will reduce the chances
of downloading malicious content onto the player.
Always allow access : Allow the BD the inserted Blu-Ray disk to access content
from all BD-Live internet sites whose internet address is encoded onto the disk.
There is no danger of malicious code download from valid commercial BD disks,
but choosing this option and downloading BD-live content via illegally authored
BD disks, or disks obtained from questionable sources, could result in malicious
code being downloaded onto the player.
Prohibit access : Blocks the inserted Blu-Ray disk from accessing BD-Live content
over the internet.
5.4.3 BD-Live Storage:
Show BD-Live storage information, select storage device to clear Blu-ray storage.
5.4.4 Screen Saver Duration:
This BD player will activate screen saver mode by shutting video output (TV will
go “Blank”) after certain period of time set by this item when system is playing
music file or in stop/fullstop mode.
5.4.5 Erase Blu-Ray Storage: Clear Blu-Ray storage.
5.4.6 CEC support:
Set this item to enable/disable CEC:
The CEC feature is designed to allow CEC-enabled devices to command and
control each other without user intervention. For example: If your TV is also CEC
-enabled and you will turn off your TV, the Blu-Ray player will get a CEC signal
and turn off automatically. Or if you turn on your Blu-Ray player, your TV will
automatically turn on and switch to HDMI input.
Note: Not every CEC-Enabled unit is compatible with this unit.
5.4.7 Reset Settings:
Reset all settings to factory default (Parental Control level will not be reset).
5.5 Network
Press “ENTER” button when the item is highlighted, then select “ WIRED” to config
network:
5.5.1 Link Status:
Show if ethernet cable is connected to BD player.
5.5.2 MAC Address
Show MAC address of this BD player.
5.5.3 IP Mode
Choose IP mode here for internet access. Choosing “Manual” mode, 4.5.5 ~ 4.5.8
will be activated for user input, otherwise they are inactivated.
5.5.4 IP Address:
Show current IP address or access user input while in “Manual” IP mode.
5.5.5 Subnet Mask:
Show current Subnet Mask or access user input while in “Manual” IP mode.
5.5.6 Gateway:
Show current Gateway or access user input while in “Manual” IP mode.
5.5.7 Primary DNS:
Show current Primary DNS or access user input while in “Manual” IP mode.
5.4 System
5.4.1 Optical Disc Auto Play: This option is used to tell the BD player whether or not to
start loading the main title menu of a disk as soon as the disk tray is closed.