Filter
Top Products
TV, projector, HDMI IN DVI IN DVI IN
etc. connector connector connector
DVD player, (HDCP compatible) (HDCP incompatible)
set-top box, etc.
HDMI OUT
-
connector (Video/Audio) (Only Video)
DVI OUT
-
connector
(HDCP compatible) (Only Video) (Only Video)
DVI OUT
(*) (*) (*)
connector
(HDCP incompatible) (Only Video) (Only Video) (Only Video)
Connecting the source equipment with the COMPONENT VIDEO OUTs
• When you connect the COMPONENT VIDEO OUTs of the source equipment to this unit, this unit can convert
the component video signals to the digital video signals and output them from the HDMI OUT connector of
this unit.
• In addition, when you connect the OPTICAL OUT to this unit, this unit can output the digital signals as they
were input from the HDMI OUT connector, too.
• When making the component video connections, connect "Y" to "Y", P
B" to "PB"(or "B-Y", "C
B") and "PR
" to
"P
R"(or "R-Y", "CR").
Connecting the display equipment with the HDMI IN connector
• The HDMI connection can carry uncompressed digital video signals and digital audio signals.
• If your display equipment (TV, projector, etc.) has the HDMI IN connector, connect it to the HDMI OUT
connector of this unit using the supplied HDMI cord.
• Among the HDMI IN connector equipped TV or projector, etc., some do not support audio output(for examples,
projectors).
In such a case, make the digital audio connection(and the analog audio connection if needed) between
the source equipment and the display equipment(or A/V amp, receiver).
Connecting the display equipment with the DVI IN connector
• If your display equipment has the DVI IN connector compatible with DVI and High-bandwidth Digital Content
Protection (HDCP), connect it to the HDMI OUT connector of this unit using a commercially available HDMI-
DVI converter cord.
Since the HDMI-to-DVI connection cannot carry audio signals, you should make the digital audio
connection(and the analog audio connection if needed) between the source equipment and the display
equipment (or A/V amp, receiver).
Notes :
• This unit supports HDMI(High Definition Multimedia Interface) version 1.1
• This unit supports HDCP(High-bandwidth Digital Content Protection), a protection system for digital video.
If not, the image will not be output properly.
• This unit supports 480p(576p), 720p, 1080i as the resolution of video signals.
Therefore, when making COMPONENT VIDEO connections, be sure to output the progressive video signals
(480p or 576p) from your source equipment.
If your source equipment outputs the interlaced video signals (480i or 576i), the HDMI OUT of this unit will
output no video signals or abnormal video signals.
• Depending on the equipment, using a DVI connection may result in unreliable signal transfers.
• Depending on the display equipment, you may specify the resolution and the audio format on the source
equipment to match them the display equipment supports.
(For details on the resolution and the audio format, refer to the operating instructions of your equipments.)
HDMI and DVI connectors
• When connecting the source equipment to the display equipment through this unit, this table shows
the compatibility of connections between the HDMI/DVI IN and the HDMI/DVI OUT connectors.
9
(*): Transferring the video signals via the DVI connector may be limited by the source equipment and the display
equipment that are connected.
(For details, refer to the operating instructions of your equipments.)