Silvercrest KH 2159 Universal Remote User Manual


 
- 21 -
Example: You want to save a command chain in a Macro.
We begin in the mode "MACRO STEP".
Desired command chain: Switch on TV => PAUSE => switch
to the AV input => switch on DVD => PAUSE => Playback
DVD.
In the mode "MACRO STEP", for this you enter the following
button commands:
=> => (Pause time) => => =>
=> (Pause time) =>
Execute a Macro
To execute a pre-programmed Macro proceed as follows:
1.
Press the MACRO button i.
2.
With the corresponding number button o you access the
desired Macro (1-6). Example: If Macro 3 is to be imple-
mented press rst the Macro button i and then, within 5
seconds, the number button "
".
To delete all Macros
To delete all pre-programmed Macros proceed as follows:
1.
Hold down the S button r for a little longer than 3 sec-
onds. The notice "CODE SETUP" appears.
2.
With the or button t select "MACRO SETUP" and
conrm with the OK button l. In the display "MACRO
SETUP 1" appears.
3.
With the or button t select "MACRO CLEAR" and
conrm with the OK button l.
4.
In the LCD display q "CONFIRM CLEAR" (conrm
delete) appears. Conrm the delete process with the
OK button l. The LCD display q shows "SUCCESS".
All Macros are now deleted and the menu will end.
Tips:
1. When the LCD display q shows "CONFIRM CLEAR" you
can stop the delete process with the EXIT button y.
2. Individual Macros can not be deleted they can only be
overwritten.
Favourites channel
Note:
With this function you can save your preferred stations as
favourites.
To programme favourites
Your favourite stations are saved as follows:
1.
Press the device button e for the device that you want to
save a favourite.
2.
Hold down the S button r for a little longer than 3 sec-
onds. The notice "CODE SETUP" appears.
BDA_KH 2159 - DT-53628_en.indd 21 08.07.2010 18:06:20