Filter
Top Products
Table 4.5
Settings Video
RGB/YPrPb
Graphics RGB
HDMI 1/2
2D
HDMI 1/2
3D
Brightness ● ● ● ●
Contrast ● ● ● ●
Color ● ● ●
1
●
1
Sharpness ● ● ● ●
Sharpness Mode ● ● ●
Filter ●
Cinema Mode ● ●
Noise Reduction ● ● ●
DynamicBlack ●
2
●
2
●
2
PureMotion ● ● ●
Aspect ● ● ● ●
3
Color Primaries ● ● ● ●
Color White ● ● ● ●
Gamma ● ● ● ●
Lamp Power ● ● ● ●
Variable Iris ●
2
●
2
●
2
●
2
3D Input Format ●
Notes:
1. YPrPb only
2. Nero 3D-2 and Nero 3D HB only
3. See Table 4.2 on page 22 for more information
The Memory Management function menu page is activated by pressing the Memory
key on the remote control.
Save Current Settings
To save the current settings for the active input in Memory (1-6):
1. press the Memory key on the remote to display Memories menu
2. press ▴ and ▾ to highlight the desired memory
3. press ● to open the corresponding pull-down menu
4. press ▴ and ▾ to highlight Save current settings
5. press ▸ to execute
The confirmation message “Current settings saved in Memory (1-6)” is displayed. The
icon at the left of the memory name now indicates that custom values are stored. If
desired, repeat the steps above to save additional memories in different locations.
Note: You can change the name of each memory. See “Rename” below for details.
Recall
To recall the settings for the current input you have previously saved in a Memory:
1. press the Memory key on the remote to display Memories menu
2. press ▴ and ▾ to highlight the desired memory
3. press ▸ to execute
4 Operation Nero 3D
User Guide
33