Filter
Top Products
14
Home Signal Distribution Kit Installation Guide
The next diagram shows the same conguration as the previous illustration.
You can see that one output of the multiswitch is connected to the input of the
Combiner, and that there are no devices such a splitter or DishPro adapter in the
common cable run between the Combiner and Splitter. If a DishPro adapter is
needed, it must be installed after the Splitter as shown.
WITHOUT DISHPRO ADAPTER: WITH DISHPRO ADAPTER:
RECVR/TUNERs
COMBINER
MULTISWITCH
RECVR/TUNERs
MULTISWITCH
SIRIUS
RECEIVER
COMMON
CABLE RUN
RECVR/TUNER
COMBINER
SPLITTER
DISHPRO
ADAPTER
SIRIUS
RECEIVER
COMMON
CABLE RUN
RECVR/TUNER
SPLITTER