Filter
Top Products
- 6 -
Features
Up to 200 programme memory.
Twin Scart connections.
Programme swapping.
Sleep timer.
4:3,Zoom1,Zoom2,panorama and Full
screen picture modes.
When no TV signal is dectected,after 5
minutes the TV switches itself automatically
to stand-bymode.
CYS: PAL / NTSC
SYS: DK / I/ M
HDMI Input (support up to 1080i)
PC Input (support up to 1080i)
PIP
NICAM Stereo / AV Stereo
Panel Features
High resolution (1366x768),26 TFT LCD
display.
2
Brightness: 500cd/m
High-speed response time <8msec.
8-bit color depth,display 16.7M colors.
High contrast ratio (1600:1 Typital)
00
Viewing angle:178 (H)/178 (V)(CR>10).
Installation
Locate the receiver in the room where direct light
does not strike the screen.
Total darkness or a reflection on the picture screen
can cause eyestrain. Soft and indirect lighting is
recommended for comfortable viewing.
Allow enough space between the receiver and the
wall to permit ventilation.
Avoid excessively warm locations to prevent
possible damage to the cabinet or premature
component failure.
This TV operates on AC supply directly, connect the
AC plug to the socket at the back of the TV. Insert the
mains plug in the socket having a mains voltage of
100-240V AC.
Do not install the receiver in a location near heat
sources such as radiator, air ducts, direct sunlight,
or in a place somewhere like close compartment
and close area.
Do not cover the ventilation openings when using
In The Box
Television
User Guide
You should have:
Remote control
Warranty Card
2 x AAA battery
SCART to RCA jack video connector
Stand
Wall mount