Filter
Top Products
- 9 -
Picture menu
Enter Picture menu,you can select Brightness,Contrast,
Colour,Sharpness,Colour Temp and N.R. items by
pressing PRGO.+ or PROG.- buttons.""""
""""
""""
""""
noise reduction , The options
Brightness
Using the VOL.+ / VOL.- button lighten/
darken the picture.
Contrast
Press the VOL.+ / VOL.- key to enhance/
reduce the contrast of the picture.
Colour
Press the VOL.+ / VOL.- button to increase/
decrease the colour saturation.
Sharpness
Utilize the button to sharpen or soften the picture.
Colour Temp
Make use of the button to select a suitable colour
temperature to display.
The choices are Normal, Cooler, Cool, Warm, Warmer.
N.R.
Press the button to adjust
are Off, Low, Middle, High.
Sound menu
Enter Sound menu,you can select Volume,Balance,
Surround,MSS and Equalizer items by pressing
PRGO.+ - Buttons.
Volume
Press the VOL.+ / VOL.- button to adjust
the sound volume .
Balance
Choose the VOL.+ / VOL.- button to adjust
to the left to right sound channel volume.
Surround
Press the key to select surround mode,on/off.
"" /"PROG. "
"" ""
"" ""
MENU BUTTON
1.Press menu button to display menu ,and press
"VOL.+"or "VOL.-" to select sub menu.
Menu button has two functions: First is opening or slosing
the menu, and the second is colsing the current menu and
then opening the previous menu.
The menu will time out automatically after several
seconds if it is left on the screen.
Press the "MENU" key on the remote control unit to
cancel the menu function.
PICTURE Menu
TUNER Menu
SOUND Menu
PIP Menu
FUNCTION Menu
2.After entering an item, you can select the desired
adjusting item by the "VOL.+"/"VOL.-" buttons, and
adjust It by the "PROG. +"/"PROG.-" buttons.
MSS
Press the button to get bass or treble.
The choice are on and off.
Equalizer
A tone control system designed to compensate
for frequency distortion in audio systems.
Enter Equalizer ,you can select 120HZ,500HZ,
1.5KHZ,5KHZ and 10KHZ items by pressing
PROG.+ Buttons and change the
correspondingvalue of volume by pressing
VOL.+ - Buttons.
"" /"PROG.-"
"" /"VOL. "
Tuner menu
Followed by the Tuner menu, Program,Colour
System,Sound System,Auto Tune,Tuning,Fine
Tune,Prog.Sort and Skip are the items,which can be
selected by pressing PROG.+ / PROG.-
buttons.
Program
Using the VOL.+ / VOL.- buttons change
program you expect.
""""
""""
Colour System
Press the button to select a new colour standard
value in TV.
The Choices are AUTO,NTSC,PAL.