Filter
Top Products
REMOTE CONTROL OPERATION
9
TV MODE:
1.POWER Button( )
Press this button to turn the TV on or into standby mode.
2.MUTE Button
Press this button to mute the sound and the sign of mute
will appear all the while if you do not press again.
But the sign of mute will disappear if the CCD is displayed.
3.SLEEP Button
Press this button to set the sleep timer. When the preset
length of time has passed, the TV set enters standby
mode. The sleep timer values are follows: off, 15¡¢ 30¡¢
60¡¢90¡¢ 120¡¢180¡¢240 minutes.
4.SOUND Button
Press this button to select desired sound mode. Four
sound modes are available including Standard, Music,
Movie and Personal.
5.PICTURE Button
Press this button to select desired picture mode. Four
picture modes are available including Standard, Soft,
Dynamic and Personal.
6.RECALL Button
Press this button to watch the previously viewed
channel for both ATV and DTV.
7.MTS Button
When stereo program is received, press this button to
switch sound system between mono and stereo. When
SAP program is received, press this button to switch
sound system between mono and SAP. When stereo
and SAP program is received, press this button to switch
among mono, stereo and SAP.
8.CC Button
Press this button to select the CC Mode. Three CC Mode
are available including On, CC on Mute and off.
9.DISPLAY Button
Press this button to display the information on current
input.
10.NUMBER (0-9)Buttons
Press these buttons to enter digits. These buttons for
direct access to use a channel to enter channel number
for both ATV and DTV or enter password for V-Chip.
2
19
17
10
1
15
14
9
18
7
3
-/---/--
+ +
VOL.+VOL.-
AV/TV
ENTER
CH.+
MENU
CH.-
EXIT
EPG
MTS RECALL CC
ZOOM
PICTURE
SOUND
CH.LIST
FAV.LIST
SLEEP
4
13
16
5
6
8
21
20
11
12