Sony 40BX450 Flat Panel Television User Manual


 
32
x Notes when playing back files
While the TV is accessing the data on
the USB device, observe the following:
Do not turn off the TV or connect USB
device.
Do not disconnect the USB cable.
Do not remove the USB device.
The data on the USB device may be
damaged.
Sony will not be held liable for any
damage to, or loss of, data on the
recording media due to a malfunction of
any connected devices or the TV.
Playback does not start automatically if
the TV is turned on after connecting the
digital still camera or other device to the
USB port.
USB playback is supported for the
following photo file formats:
JPEG (JPEG format files with the
extension “.jpg” and conforming to DCF
2.0 or Exif 2.21)
(KDL-46/40BX450 only)
USB playback is supported for the
following music file format:
MP3 (files with the extension “.mp3” that
have not been copyrighted)
USB playback is supported for the
following video file format:
MPEG1, MPEG2 (files with the extension
“.mpg”)
Photo Playback Auto Start works only for
photo files in the newest digital still
camera folder (DCF-compliant, highest-
numbered “DCIM” folder).
Playback may not start automatically
when some digital still cameras (such as
cameras with internal memory) are
connected.
The file name and folder name support
only English.
When you connect a Sony digital still
camera, set the camera’s USB
connection mode to “Auto” or “Mass
Storage.” For more information about
USB connection mode, refer to the
instructions supplied with your digital
camera.
Use a USB storage device that is
compliant with USB Mass Storage Class
standards.
The file system on the USB device
supports FAT16, FAT32 and NTFS.