Sony 40HX701 CRT Television User Manual


 
12
Organizing the AC power
cord
1 For KDL-55HX701/KDL-46HX701
models only
2 For all models
Running initial setup
1 Complete your cable connections
before proceeding with the Initial
Setup.
Connect the TV to your nearest power
outlet.
2 For HX701 series models, check the
ENERGY SAVING SWITCH setting
is on (z).
3 Press POWER on the TV.
When you switch the TV on for the first
time, the Language menu appears on
the screen.
4 Follow the instructions on the screen.
~
The ENERGY SAVING SWITCH must be
on (z) to set the clock and obtain program
information for the TV Guide.
Home mode sets the TV to display the settings
optimized for home viewing (this setting is
ENERGY STAR compliant).
5 Select Continue to scan for available
channels and enable the
TV Guide On
Screen
®
feature. If you receive channels
from a cable box or satellite receiver
and do not wish to use the TV’s built-in
tuner, select
Skip.
Selecting
Skip will disable the TV Guide
On Screen
feature, which is only
available when the TV’s tuner is used.
~
If you skip the channel scan while in the setup
menus, TV Guide will be disabled.
Detaching the Table-Top
Stand from the TV
Remove only the screws marked with on
the TV.
~
Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
POWER
For EX701 series
models only