Filter
Top Products
13
3 To set up an unencrypted wireless signal, select Open authentication A and No encryption
B. Select Set C to save the changes. Then select the Back button D.
1
4 Select an SSID
2
you want to connect to and select Connect.
5 If the wireless signal is unencrypted, the Wireless signal quality level appears A and the
icon on the top bar B changes to . If the wireless signal quality level does not appear,
make sure you entered the correct encryption code in step
3 (page 13) or go back to step
2 (page 12) and choose another SSID.
6 Try to connect to any website. Most hotspots requiring a login will automatically redirect
you to the login page. Note that some hotspots may require a fee.
7 Go to TV or Video and select NetAV to start!
A dialog box will show that you are Connecting, then > Authenticating > Buffering.
Shortly the picture will appear. Enjoy!
A
B
C
D
Settings > Monitor > On the go - Wireless > Public Wireless Access > Connection Settings
B
A
Settings > Monitor > On the go - Wireless > Public Wireless Access
1
Some commercial hotspots require an encryption code to log-on. If needed, enter the encryption code at this step. Also,
note that some commercial hotspots require a fee for access.
2
SSID stands for Service Set Identifier, a label that distinguishes one wireless LAN from another.
LFX1.fm Page 13 Friday, February 4, 2005 7:04 PM