Filter
Top Products
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\DTP
EX2L(05_02)\EX2L_PAPER_OnLine\4136111121KDL40E55xx\030STU.f
m
masterpage:Left
4
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Start-up Guide
Before Use
To check the accessories
Mains lead (Type C-6)* (1) (Except for 37/32
inches)
Stand (1) and screws (4) (Except for 52 inches)
RM-ED016 / RM-ED016W Remote (1)
RM-ED012 Remote (1) (KDL-46/40/37/32W5720/
5730/5740 only)
Size AA batteries (R6 type) (2)
* Do not remove the ferrite cores.
To insert batteries into the remote
1: Attaching the stand
(Except for 52 inches)
1 Open the carton box and take out the stand
and the screws.
2 Place the TV set on the stand. Take care
not to interfere with cables.
3 Fix the TV to the stand according to the
arrow marks that guide the screw holes
using the supplied screws.
~
• For KDL-40E55/32E55xx you can adjust the
stand to a higher position. For details refer to
leaflet “How to change the height of the stand”.
• If using an electric screwdriver, set the tightening
torque at approximately 1.5 N·m (15 kgf·cm).
Push and lift the cover to open.