Filter
Top Products
13
Setting up your TV
Securing the TV
Sony strongly recommends
taking measures to prevent
the TV from toppling over.
Unsecured TVs may topple
and result in property
damage, serious bodily
injury or even death.
Preventing the TV from
Toppling
• Secure the TV to a wall and/or stand.
• Do not allow children to play or climb on
furniture and TV sets.
• Avoid placing or hanging items on the
TV.
• Never install the TV on:
– slippery, unstable and/or uneven
surfaces.
– furniture that can easily be used as
steps, such as a chest of drawers.
• Install the TV where it cannot be pulled,
pushed, or knocked over.
• Route all AC power cords and
connecting cables so that they are not
accessible to curious children.
Recommended Measures to
Secure the TV
Consider the following measures when
securing your TV to a TV stand (not
supplied).
1 Secure the Stand for the TV.
Make sure the TV stand can adequately
support the weight of the TV. Use two angle
braces (not supplied) to secure the stand.
For each angle brace use the appropriate
hardware to:
• Attach one side of the angle brace to the
wall stud.
• Attach the other side to the TV stand.
2 Secure the TV to the Stand.
Use the optional hardware listed below (not
supplied):
• A machine screw (screwed into the TV’s
Table-Top Stand)
For KDL-60NX801, KDL-60/52/
46NX800 and KDL-46/40NX700
Use M4 × 16 screw
For KDL-55NX811, KDL-60/55/
46NX810, KDL-46/40NX711 and
KDL-46/40NX710
Use M4 × 8 screw
• A screw or similar (attach it to the TV
stand)
• Rope or chain (strong enough to support
the weight of the TV). Make sure that
there is no excess slack in the rope or
chain.
An alternative way to secure the TV is with
an optional Sony Support Belt Kit.
Stand
Angle brace
(not supplied)
Machine screw
(not supplied)
Screw (not supplied)
Screw hole on the
Table-Top Stand
Rope or chain
(not supplied)
(Continued)