Sony BDP-S4200 Blu-ray Player User Manual


 
8
BDP-S1200/S3200/S4200/S5200
4-476-195-41(1)
master page=left
C:\Users\fle1\Desktop\SD130009\4476195411_US\03
0STU.fm
Step 2: Preparing for
Network Connection
Use a LAN cable to connect to the LAN (100)
terminal on the player.
z
The use of a shielded and straight interface cable (LAN
cable) is recommended.
Use the wireless LAN that is built into the player.
Step 3: Easy Setup
1 Insert two R03 (size AAA) batteries by
matching the 3 and # ends on the
batteries to the markings inside the
battery compartment of the remote.
2 Connect the supplied AC adaptor and
AC power cord (mains lead) in the
numeric order shown below. When
removing them, do so in reverse
order.
3 Press [/1 to turn on the player..
*Turns on the player, or sets to standby
mode.
Wired Setup
Wireless Setup (BDP-S3200/S5200
only)
ADSL modem/
Cable modem
Broadband
router
LAN cable
(not supplied)
Internet
Wireless LAN
router
ADSL modem/
Cable modem
Internet
LAN cable (not supplied)
When turned on for the first time
Wait for a short while before the player turns
on and starts [Easy Initial Settings].
to mains
AC adaptor (supplied)
AC power cord (mains lead)
(supplied)
2
3
1
to DC IN 12 V
*