Sony BDP-S770 DVD Player User Manual


 
3
For customers in European
countries
The manufacturer of this product is
Sony Corporation, 1-7-1 Konan
Minato-ku Tokyo, 108-0075
Japan. The Authorized
Representative for EMC and
product safety is Sony Deutschland
GmbH, Hedelfinger Strasse 61,
70327 Stuttgart, Germany. For any
service or guarantee matters please
refer to the addresses given in
separate service or guarantee
documents.
Precautions
This unit operates on 220 V –
240 V AC, 50 Hz/60 Hz. Check
that the unit’s operating voltage
is identical with your local power
supply.
To prevent fire or shock hazard,
do not place objects filled with
liquids, such as vases, on the
apparatus.
Install this unit so that the mains
lead can be unplugged from the
wall socket immediately in the
event of trouble.
Notes About the Discs
To keep the disc clean, handle
the disc by its edge. Do not
touch the surface.
Dust, fingerprints, or scratches
on the disc may cause it to
malfunction.
Do not expose the disc to
direct sunlight or heat sources
such as hot air ducts, or leave it
in a car parked in direct
sunlight as the temperature
may rise considerably inside
the car.
After playing, store the disc in
its case.
Clean the disc with a cleaning
cloth. Wipe the disc from the
centre out.
Do not use solvents such as
benzine, thinner,
commercially available disc/
lens cleaners, or anti-static
spray intended for vinyl LPs.
If you have printed the disc’s
label, dry the label before
playing.
Do not use the following discs.
– A lens cleaning disc.
– A disc that has a non-
standard shape (e.g., card,
heart).
– A disc with a label or sticker
on it.
– A disc that has cellophane
tape or sticker adhesive on it.
Do not resurface the playing
side of a disc to remove
surface scratches.
Precautions
This equipment has been tested
and found to comply with the
limits set out in the EMC
Directive using a connection
cable shorter than 3 metres.
On placement
Place the player in a location
with adequate ventilation to
prevent heat build-up in the
player.
Do not place the player on a
soft surface such as a rug that
might block the ventilation
holes.
Do not install this player in a
confined space, such as a
bookshelf or similar unit.
Do not place the player in a
location near heat sources, or
in a place subject to direct
sunlight, excessive dust, or
mechanical shock.
Do not place the player
outdoors, in vehicles, on ships,
or on other vessels.
If the player is brought directly
from a cold to a warm location,
or is placed in a very damp
room, moisture may condense
on the lenses inside the player.
Should this occur, the player
may not operate properly. In
this case, remove the disc and
leave the player turned on for
about half an hour until the
moisture evaporates.
Do not install the player in an
inclined position. It is
designed to be operated in a
horizontal position only.
Do not place metal objects in
front of the front panel. It may
limit reception of radio waves.
Do not place the player in a
place where medical
equipment is in use. It may
cause a malfunction of
medical instruments.
If you use a pacemaker or
other medical device, consult
your physician or the
manufacturer of your medical
device before using the
wireless LAN function.
,continued