Filter
Top Products
50
US
Distortion occurs in the sound of a connected
component.
t Reduce the input level for the connected
component by setting [Attenuate - AUDIO]
(page 42).
Radio stations cannot be tuned in.
t Check that the antenna (aerial) is connected
securely. Adjust the antenna (aerial) or connect
an external antenna (aerial) if necessary.
t The signal strength of the stations is too weak
(when tuning in with automatic tuning). Use
manual tuning.
The disc does not play.
t The region code on the BD/DVD does not
match the system.
t Moisture has condensed inside the unit and
may cause damage to the lenses. Remove the
disc and leave the unit turned on for about half
an hour.
t The system cannot play a recorded disc that is
not correctly finalized (page 52).
File names are not displayed correctly.
t The system can only display ISO 8859-1
compliant character formats. Other character
formats may be displayed differently.
t Depending on the writing software used, the
input characters may be displayed differently.
A disc does not start playing from the
beginning.
t Resume play has been selected. Press
OPTIONS and select [Play from beginning],
then press .
Playback does not start from the resume
point where you last stopped playing.
t The resume point may be cleared from
memory depending on the disc when
• you open the disc tray.
• you disconnect the USB device.
• you play other content.
• you turn off the unit.
The language for the soundtrack/subtitle or
angles cannot be changed.
t Try using the BD’s or DVD’s menu.
t Multi-lingual tracks/subtitles or multi-angles
are not recorded on the BD or DVD being
played.
Bonus contents or other data that are
contained in a BD-ROM cannot be played.
t Try the following:
1 Remove the disc.
2 Turn the system off.
3 Remove and reconnect the USB device
(page 26).
4 Turn the system on.
5 Insert the BD-ROM with BONUSVIEW/
BD-LIVE.
The USB device is not recognized.
t Try the following:
1 Turn the system off.
2 Remove and reconnect the USB device.
3 Turn the system on.
t Make sure that the USB device is securely
connected to the (USB) port.
t Check if the USB device or a cable is damaged.
t Check if the USB device is on.
t If the USB device is connected via a USB hub,
disconnect it and connect the USB device
directly to the unit.
The picture/sound is poor/certain programs
display with a loss of detail, especially
during fast-motion or dark scenes.
t Picture/sound quality may be poor depending
on Internet content providers.
t Picture/sound quality may be improved by
changing the connection speed. Sony
recommends a connection speed of at least 2.5
Mbps for standard-definition video and 10
Mbps for high-definition video.
t Not all videos contain sound.
The picture is small.
t Press X to zoom in.
Tuner
Playback
USB device
BRAVIA Internet Video