Filter
Top Products
Chapter 4 Menu Settings 4-33
Chapter 4 Menu Settings
4-5 PF1 Menu (Factory Settings)
Chapter 4 Menu Settings
The PF (Personal Function) 1 menu is used to register
frequently used menu items.
When shipped from the factory, the PF1 menu contains
the adjustment menu for video signals. If you later use
the PF1 menu to register items from other menus, you
can restore the PF1 menu to its original factory settings
by recalling SETUP BANK [F] from the VTR memory
banks.
For details on registration methods, refer to “4-1-3
Registering Items to the PF1/2 Menus” on page 4-3, and on
restoring factory-set menu items, refer to “4-1-4 VTR
Memory Bank Function” on page 4-4.
To activate the PF1 menu screen
Press the PF1 button.
PF1 menu display
prst, 0 to B50H
[F2]
Button Indication Settings
[F1] Selects the input video signal. sif, cmpst, y-r/b
Selects the reference signal for output. ref, input
[F3] Switches the control of the digital video processor. menu, local, rmt
[F4] Adjusts the output level of the video output signal.
[F5] Adjusts the chroma output level. prst, 0 to B50H
[F6] Adjusts the setup level. prst, 0 to 220H
Function
Adjusts the black level.
Adjusts the Y/C delay during analog Betacam playback. prst, 0 to FFFH
[F7]
PF1 menu (factory settings)
prst, 0 to 220H
SETUP LEVEL (DVW-
A500/1 and 500/1 only)
VIDEO IN
OUT REF
PROC CONTRL
VIDEO GAIN
CHROMA GAIN
BLACK LEVEL (DVW-
A500P/1 and 500P/1 only)
Y/C DELAY(DVW-A500/1
series only)
[F8] Adjusts the chroma phase. prst, 0 to FFHCHROMA PHASE
[F9]
SYSTEM SYNC
Adjusts the system sync phase. prst, 0 to FFH
[F10] Adjusts the system sub-carrier phase. prst, 0 to 3FFHSYSTEM SC
ÅIN --:--:--:-- ÅOUT --:--:--:--
LOCK
DOLBY
NR
VIDEO
IN
sif
CH.COND DIGITÅL PF1
TCR PLÅY 4FD F1
IN --:--:--:-- OUT --:--:--:--
00
Ó
00
µ
00
ß
00
ƒ
OUT
REF
ref
PROC
CONTRL
rmt
VIDEO
GÅIN
prst
CHROMÅ
GÅIN
prst
SETUP
LEVEL
prst
Y/C
DELÅY
prst
CHROMÅ
PHÅSE
prst
SYSTEM
SYNC
prst
SYSTEM
SC
prst