Sony BOP-S2100 Blu-ray Player User Manual


 
36
BDP-S2100
4-479-117-11(1)
master page=left
C:\Users\fle1\Desktop\SD130005\DATA\4479117111\
070ADD.fm
The disc tray does not open and you
cannot remove the disc even after you
press Z.
, Try the following: 1Turn the player
off, and disconnect the AC power cord.
2Reconnect the AC power cord while
pressing down Z on the player.
3Keep pressing down Z on the player
until the tray opens.
4Remove the
disc.
5Hold down [/1 on the player
for more than 10 seconds until the
player turns off.
The player does not respond to any
button.
, Moisture has condensed inside the
player (page 4).
, Hold down [/1 on the player for more
than 10 seconds until the player turns
off.
If the player still does not respond to
any button, disconnect then reconnect
the AC power cord.
Specifications
System
Laser: Semiconductor laser
Inputs and outputs
(Jack name:
Jack type/Output level/Load
impedance)
HDMI OUT:
HDMI 19-pin standard connector
USB:
USB jack Type A (For connecting a
USB memory, memory card reader,
digital still camera, and digital video
camera)
Wireless
Wireless LAN standard:
IEEE 802.11 b/g/n
Frequency range:
2.4 GHz band: Channels 1-11
Modulation:
DSSS and OFDM
General
Power requirements:
120 V AC, 60 Hz
Power consumption: 9.9 W
Dimensions (approx.):
290 mm × 194 mm × 43 mm
(11
1
/
2
in. × 7
3
/
4
in. × 1
3
/
4
in.)
(width/depth/height)
incl. projecting parts
Mass (approx.): 1.1 kg (2 lb 7 oz)
Operating temperature:
5ºC to 35ºC (41°F to 95°F)
Operating humidity:
25 % to 80 %
Supplied accessory
Remote commander (remote) (1)
(Batteries not supplied)
Specifications and design are subject to
change without notice.