Filter
Top Products
33
Recording
Chapter 2 Recording and Playback
Recording
This section describes the necessary settings and operations to perform
recording on this unit. The same settings and operations apply whether you are
using the unit as part of an editing system, for dubbing, or as a stand-alone
recorder.
For the necessary connections for recording and the settings not covered in this
section, see Chapter 5 “Connections and Settings.”
For dubbing of SDTI (QSDI) format signals, use the AUTO FUNCTION menu
item SDTI DUBBING (see page 79). For details, see “Digitally Dubbing
Signals in DVCAM/DV Format” on page 59.
For this unit, recording in DVCAM format is recommended, but recording in
DV (SP mode only) format is also possible.
Notes
• When carrying out multiscene continuous recording on a DV (SP) tape using
this unit with an optional remote control unit such as the DSRM-10, on rare
occasions, the video may be disrupted at the IN point of the first scene or the
audio may be muted due to a REC MODE (audio recording mode) difference
between the tape and this unit.
There may also be cases in which the unit is subjected to some functional
restrictions attributable to the use of the DV format.
• When using the unit as an editor, the optional boards corresponding to the
input signal formats to be used are required.
For details about the optional boards, see “Optional Accessories” (page 11).