Filter
Top Products
28
GB
Watching a DVD
123
46
78
0/10
ENTER
9
SYSTEM STANDBY
TV INPUT
SLEEP
DMPORT
TV
?/1
AV
?/1
VIDEO 1 VIDEO 2 VIDEO 3 DVD
2CH A.F.D.
RETURN/EXIT
TV CH –
PRESET –
TV CH +
PRESET +
TUNING –
TV
TUNING +
REPLAY ADVANCE
MENU
MOVIE MUSIC
MEMORY DVD MENU
FM MODE
CLEAR
TOOLSDISPLAY
MUTING
TV VOL
MASTER VOL
AUTO CAL
D.TUNING
D.SKIP
AMP MENU
SAT TV SA-CD/CD TUNER
?/1
-
F
Gg
f
.
HmM
Xx
<
<
>
5
>10/
DMPORT VIDEO 1 VIDEO 2/BD DVD SAT TV SA-CD/CD TUNER
AUTO CAL MIC
INPUT SELECTOR
PRESET TUNING SOUND FIELD MUTING
?/1
MASTER VOLUME
2
3
7
7
3
Notes
•Refer to the operating
instructions supplied with the
TV and DVD player.
•Check the following if you
cannot listen to multi channel
sound.
– Be sure this receiver is
connected to the DVD player
via a digital connection.
– Be sure the digital audio
output of the DVD player is
set up properly.
Tips
•Select the audio format of the
disc to be played, if necessary.
• You can select the sound field to
suit the movie/music. Refer to
page 39 for details.
Recommended sound fields:
Movie: C.ST.EX
Music: CONCERT
1 Turn on the TV and DVD player.
2 Turn on the receiver.
3 Press DVD.
You can also use INPUT SELECTOR on this receiver to
select “DVD”.
4 Switch the input of the TV so that an image
of the DVD is displayed.
If you connect the DVD player and receiver using other
than HDMI connection, be sure that the video output of the
DVD player is connected to the TV.
5 Set up the DVD player.
Refer to “Quick Setup Guide” supplied with the receiver.
6 Playback the disc.
7 Adjust to a suitable volume.
8 After you have finished watching the DVD,
eject the disc and turn off the receiver, TV
and DVD player.