Sony DVP-NS37 DVD Player User Manual


 
24
Resuming Playback from
the Point Where You
Stopped the Disc
(Resume Play/Multi-disc Resume)
The player remembers the point where you
stopped the disc.
Notes
For DVD-RWs/DVD-Rs in VR mode, CDs,
DATA CDs, and DATA DVDs the player
remembers the resume playback point for the
current disc.
The resume point is cleared when:
– you opened the disc tray.
– you disconnect the power cord.
– the player enters standby mode (DATA CD/
DATA DVD only).
Resume Play does not work during Shuffle Play
and Program Play.
This function may not work with some discs.
Resuming playback for the
current disc (Resume Play)
The player remembers the point where you
stopped the disc even if the player enters
standby mode by pressing [/1.
1 While playing a disc, press x to stop
playback.
“RESUME” appears on the front panel
display.
2 Press H.
The player starts playback from the point
where you stopped the disc in Step 1.
z Hint
To play from the beginning of the disc, press x
twice, then press H.
Note
The resume playback point for the current disc is
cleared when:
– you change the play mode.
– you change the settings on the Setup Display.
– you disconnect the mains lead.
Storing the point where you
stopped the disc (Multi-disc
Resume) (DVP-NS37 only)
The player stores the point where you stopped
the disc for up to 6 discs and resumes
playback the next time you insert the same
disc. When you store a resume playback point
for the seventh disc, the resume playback
point for the first disc is deleted.
z Hints
To play from the beginning of the disc, press x
twice, then press H.
To turn off the Multi-disc Resume function, set
“MULTI-DISC RESUME” in “CUSTOM
SETUP” to “OFF” (page 64). Playback restarts at
the resume point only for the current disc in the
player.
Notes
“MULTI-DISC RESUME” in “CUSTOM
SETUP” must be set to “ON” (default) for this
function to work (page 64).
The point where you stopped playing is cleared
when:
– you change the play mode.
– you change the settings on the Setup Display.
If “MULTI-DISC RESUME” in “CUSTOM
SETUP” is set to “ON” and you playback a
recorded disc such as DVD-RW, the player may
playback other recorded discs from the same
resume point.