Filter
Top Products
15
Hookups
Step 3: Connecting to an Audio Component
If your audio component such as an AV amplifier (receiver) has a Dolby*
1
Digital, DTS*
2
, or
MPEG audio decoder and a digital input jack, use this connection. You can enjoy Dolby Digital
(5.1 ch), DTS (5.1 ch) and MPEG audio (5.1 ch) surround effects.
z Hint
For correct speaker location, see the operating
instructions supplied with the connected
components.
*1 Manufactured under license from Dolby
Laboratories.
Dolby, Pro Logic, and the double-D symbol are
trademarks of Dolby Laboratories.
*2 Manufactured under license under U.S. Patent
#: 5,451,942 & other U.S. and worldwide
patents issued & pending. DTS and DTS Digital
Out are registered trademarks and the DTS
logos and Symbol are trademarks of DTS, Inc.
© 1996-2007 DTS, Inc. All Rights Reserved.
Notes
• After you have completed the connection, make
the appropriate settings in Quick Setup (page 18).
If your audio component has an MPEG audio
decoder function, set “MPEG” to “MPEG” in
AUDIO SETUP (page 54). Otherwise, no sound
or a loud noise will come from your speakers.
• The TVS effects of this player cannot be used
with this connection.
• In order to listen to DTS sound tracks, you must
use this connection. DTS sound tracks are not
output through the LINE (RGB)-TV (SCART)
jack, even if you set “DTS” to “ON” in Quick
Setup (page18).
L
CENTER
COAXIAL
DIGITAL OUT
Audio component with
a decoder
: Signal flow
Coaxial digital cord
(not supplied)
to DIGITAL OUT (COAXIAL)
Rear (L)
CD/DVD player
[Speakers]
Front (L)
[Speakers]
to coaxial
digital input
Rear (R)
Front (R)
Subwoofer
Centre