Filter
Top Products
Playing CDsGetting Started
Getting Started
Getting Started
Getting Started
9
GB
Necessary Setup Before Using
the Player
Some setups are necessary for the player depending on
the TV or other components to be connected.
For details on using the setup display, see page 33.
For details on each setup display item, see pages 34 to
36.
pTo connect the player to a wide-screen TV
In the setup display, set “TV TYPE” in “INITIAL SETUP
1” to “16:9.” This is default setting.
pTo connect the player to a normal TV
In the setup display, set “TV TYPE” in “INITIAL SETUP
1” to “4:3 LETTER BOX” or “4:3 PAN SCAN.” For
details, see page 35.
pTo connect the player to a TV or VCR via EURO AV
connector that conforms to the S video signals or RGB
signals
In the setup display, set “EURO AV OUT” in “INITIAL
SETUP 1” to “S VIDEO” or “RGB.” For details, see page
35.
pTo listen to the stereo sound through speakers
connected to a normal amplifier or through TV speakers
In the setup display, set “SURROUND” in “INITIAL
SETUP 2” to “OFF.”
pTo listen to the sound through speakers connected to
an amplifier (or a TV) that conforms to Dolby Pro Logic
surround
In the setup display, set “SURROUND” in “INITIAL
SETUP 2” to “ON.” This is default setting.
pTo listen to the sound through speakers connected to
an amplifier with a digital connector or to output the
sound to a digital component such as a DAT or MD deck
When you play a DVD, set “DIGITAL OUT” in “INITIAL
SETUP 2” to “PCM” in the setup display. This is default
setting.
Use the setup display to change the various settings for
the picture and sound.
For details, see page 33.
This player conforms to the PAL color system.
When you play a disc recorded in the NTSC color
system, the player outputs the video signal or the
setup display etc. in the NTSC color system and
the picture may not appear on the TV screen. In
this case, open the disc tray and remove the disc.
Selecting the Language for
On-screen Display
You can select the language for the setup display or the
messages displayed on the screen. Default setting is
“ENGLISH.”
1 Press SET UP and select “ ” using ?//, and
then press ENTER.
2 Select “OSD” (On-Screen Display) using >/.,
then press / or ENTER.
3 Select the language you want using >/., then
press ENTER.
To cancel using the setup display on the way
Press SET UP.
Note
The languages you can select are the ones displayed in step 2.
For details, see page 34.
SET UP
?/>/.//
ENTER
LANGUAGE SETUP
OSD: ENGLISH
ENGLISHDVD MENU:
AUDIO:
SUBTITLE:
ORIGINAL
AUDIO FOLLOW
1 2
LANGUAGE SETUP
OSD:
DVD MENU:
AUDIO:
SUBTITLE:
1 2
ITALIANO
ESPAÑOL
NEDERLANDS
PORTUGUÊS
NEDERLANDS
FRANÇAIS
DEUTSCH
ENGLISH
CHOIX DE LA LANGUE
ECRANS: FRANÇAIS
ENGLISHMENU DVD:
AUDIO:
SOUS-TITRE:
ORIGINAL
IDEM AUDIO
1 2
DVP-S715
DVP-S315