Filter
Top Products
Basic Operations
14
EN
Make settings on your TV.
Turn on the TV and select the video input so that you can view
the pictures from this player.
When using an amplifier
Turn on the amplifier and select the appropriate position so that
you can listen to the sound from this player.
Press POWER to turn on the player.
The indicator (red) above the POWER button changes to green
and the front panel display lights up.
Press §, and place the disc on the disc tray.
Press ·.
The disc tray closes and the player starts playback (Continuous
Play). Adjust the volume on the TV or the amplifier.
Playing a CD/VIDEO CD
1
• The operating procedure of DVDs
is different from that of CDs or
VIDEO CDs.
For details, see pages 10 to 13.
z You can turn on the player
using the remote
Press POWER when the
indicator above the POWER
button on the front panel is
lit in red.
z After following Step 4
The menu screen may
appear on the TV screen
depending on the VIDEO
CD. You can play the disc
interactively, following the
instructions on the menu
screen. (PBC Playback, see
page 17.)
Notes
• If you use an FM/AM tuner by
the player, turn off the player.
• If you leave the player or the
remote in pause mode for 15
minutes, the screen saver
image appears automatically.
To disappear the screen saver,
press ·. (If you want to set
the screen saver function to off,
see page 36.)
• If you don’t operate the player
or the remote for more than 30
minutes when a disc is not
being played, the power is
automatically turned off (Auto
Power Off function.)
2
Connect headphones.
Adjust the headphone
volume.
243
3
4
With the label side
facing up
Basic Operations
Depending on the VIDEO CD, some operations may be different or restricted.
Refer to the instructions supplied with your disc.