Sony DVP-NC66K DVD Player User Manual


 
F:\SONY DVD\2667815F11 DVP-
NC66K_GB\SOURCE\DVP-
NC66K_GB\01GB10ADV1-CEK.fm
master page=left
48
DVP-NC66K
2-667-815-F1(1)
TVS NIGHT
Large sounds, such as explosions, are
suppressed, but the quieter sounds are
unaffected. This feature is useful when you
want to hear the dialogue and enjoy the
surround sound effects of “TVS WIDE” at
low volume.
TVS STANDARD
Creates three sets of virtual rear speakers
from the sound of the front speakers (L, R)
without using actual rear speakers (shown
below). Use this setting when you want to use
TVS with 2 separate speakers.
Notes
When the playing signal does not contain a signal
for the rear speakers, the surround effects cannot
be heard.
When you select one of the TVS modes, turn off
the surround setting of the connected TV or
amplifier (receiver).
Make sure that your listening position is between
and at an equal distance from your speakers, and
that the speakers are located in similar
surroundings.
Not all discs will respond to the “TVS NIGHT”
function in the same way.
The TVS effects do not work when using the Fast
Play or Slow Play functions, even though you can
change the TVS modes.
You select one of the TVS modes, the player does
not output the sound of center speaker.
L: Front speaker (left)
R: Front speaker (right)
: Virtual speaker
L R