Filter
Top Products
23
Playing Discs
Resuming Playback from
the Point Where You
Stopped the Disc (Resume
Play)
The player remembers the point where you
stopped the disc even if the player enters
standby mode by pressing [/1.
1 While playing a disc, press x to stop
playback.
“RESUME” appears on the front panel
display.
2 Press H.
The player starts playback from the point
where you stopped the disc in Step 1.
z Hint
To play from the beginning of the disc, press x
twice, then press H.
Note
• The resume playback point for the current disc is
cleared when:
– you change the play mode.
– you change the settings on the Setup Display.
– you disconnect the mains lead (CD or DATA CD/
DATA DVD only).
• When playing a DVD-RW in VR mode, the point
where you stopped is cleared when the disc tray is
opened or the mains lead is disconnected.
• When playing a CD, the point where you stopped
is cleared when the disc tray is opened or the
mains lead is disconnected.
• When playing a DATA CD, the point where you
stopped is cleared when the player enters standby
mode, the disc tray is opened, or the mains lead is
disconnected.
• This function may not work with some discs.
• Resume Play does not work during Shuffle Play
and Programme Play.