Filter
Top Products
72
x48kHz/96kHz PCM (DVD only)
Selects the sampling frequency of the audio
signal to be output via the DIGITAL OUT
(OPTICAL or COAXIAL) jacks.
Notes
• Even if you set “48kHz/96kHz PCM” in “AUDIO
SETUP” to “96kHz/24bit,” the sampling frequency
is converted to 48kHz/16bit when a SURROUND
mode (page 50) is selected.
• The analog audio signals from the LINE OUT L/R
(AUDIO) 1/2 jacks are not affected by this setting
and keep their original sampling frequency level.
Settings for the Speakers
(SPEAKER SETUP)
To obtain the best possible surround sound,
set the size of the speakers you have
connected and their distance from your
listening position. Then use the test tone to
adjust the volume and the balance of the
speakers to the same level.
This setting is effective when connecting the
speaker with 5.1CH OUTPUT jacks (page
21).
Select “SPEAKER SETUP” in the Setup
Display. For details, see “Using the Setup
Display” (page 65).
The default settings are underlined.
To return to the default setting
Select the item, then press CLEAR.
xSIZE
Selects the size of the speakers to be
connected.
•FRONT
•CENTER
48kHz/16bit The audio signals of DVDs are
always converted to 48kHz/16
bit.
96kHz/24bit All types of signals including
96kHz/24bit are output in their
original format. However, if the
signal is encrypted for copyright
protection purposes, the signal is
only output as 48 kHz/16 bit.
If a receiver (amplifier) which
cannot accept 96Hz is connected
to the player, do not set this.
Otherwise, a loud noise may
come out from the speakers.
LARGE Normally select this position.
SMALL When the sound cracks or the
surround sound effects are difficult to
hear, select this. This activates the
Dolby Digital bass redirection
circuitry and outputs the bass
frequencies of the front speaker from
the subwoofer.
NONE
If you do not connect a center speaker,
select this.
LARGE Normally select this position.
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
OFF
TEST TONE:
FRONT:
CENTER:
YES
LARGE
(
REAR
)
LARGE
LARGE
REAR:
SUBWOOFER: