Filter
Top Products
65
US
Additional Information
“Data error” appears on the TV screen
when playing a DATA CD/DATA DVD.
, The MP3 audio track/JPEG image file you
want to play is broken.
, The data is not MPEG-1 Audio Layer III
data.
, The JPEG image file format does not
conform to DCF (page 46).
, The JPEG image file has the extension
“.JPG” or “.JPEG,” but is not in JPEG
format.
The CONTROL FOR HDMI function does
not work.
, When HDMI indicator does not light up on
the front panel, check the HDMI connection
(page 15).
, Set the “CONTROL FOR HDMI” setting in
“HDMI SETUP” to “ON” (page 61).
, Make sure that the connected component is
compatible with the CONTROL FOR
HDMI function. Please refer to the
operating instructions of the component for
detailed explanation.
, If you change the HDMI connection,
connect and disconnect the AC power cord,
or if a power failure occurs, turn on all
components connected to HDMI, and set
“CONTROL FOR HDMI” setting in
“HDMI SETUP” to “OFF,” then set the
“CONTROL FOR HDMI” setting in
“HDMI SETUP” to “ON” (page 61).
‘BRAVIA Sync’ display does not appear.
, Turn off any display of the DVD player
displays. Then, try again.
, Please return to the one screen mode if your
TV is in two screen mode. Then, try again.
Display language on the screen switches
automatically.
, When “LANGUAGE FOLLOW” is set to
“ON” in the “HDMI SETUP” (page 61), the
display language on the screen
automatically switches, according to the
language setting of the connected TV, if you
change the language settings on your TV,
etc.
The DVD player turns on automatically.
, HDMI input is selected using TV Interface.
Some TV has this function for CONTROL
FOR HDMI.
, “CONTROL FOR HDMI” in “HDMI
SETUP” is set to “ON” (page 61).