Filter
Top Products
35
Playback
Adjusting the Delay
Between the Picture and
Sound (AV SYNC)
When the sound does not match the pictures
on the screen, you can adjust the delay
between the picture and sound.
1 Press DISPLAY twice during
playback.
The Control Menu appears.
2 Press X/x to select
(AV SYNC), then press ENTER.
The following display appears.
3 Press x to select “SET c”, then
press ENTER.
The “AV SYNC” adjustment bar
appears.
4 Press c repeatedly to adjust the
delay.
Each time you press C/c, the delay is
adjusted by 10 milliseconds.
5 Press ENTER.
The selected setting takes effect.
To reset the “AV SYNC” setting
Press CLEAR in step 4.
Notes
• This function is not effective if you use the
DIGITAL OUT (OPTICAL or COAXIAL) jack,
and set “DOLBY DIGITAL” or “DTS” in
AUDIO SETUP to “DOLBY DIGITAL” or “ON”
respectively (page 60).
• This function is not effective if you connect a
Dolby Digital or DTS-compliant device via the
HDMI OUT jack, and set “DOLBY DIGITAL” or
“DTS” in AUDIO SETUP to “DOLBY
DIGITAL” or “ON” respectively (page 61).
• For DATA CDs/DATA DVDs, this function
works only for DivX video files.
STOP
DVD VIDEO
0 ms
SET
AV SYNC 0ms